any amount
Under the right conditions, chlorine will react with carbon monoxide to form phosgene gas, COCl2. This is unlikely to happen at the tailpipe of your vehicle since the reaction normally requires the presence of a catalyst such as activated carbon.
When vehicle is in motion, due to friction in air, the body of the vehicle gets charged.If accumulated charge becomes exessive, sparking may occur and inflammable materials may catch fire.Therefore metallic chains touching the ground are introduced so that the charge quickly leaks to earth. Hence danger of fire is avoided.
In a head on collision, they will be thrown forward in each vehicle.
In a head on collision, they will be thrown forward in each vehicle.
Powering vehicle's and powering buildings
When you come within 100 feet of an intersection or a railroad crossing, passing another vehicle is permitted.
200
you keep speeding
Get out of the vehicle and run toward the train but stay off the tracks to avoid being hit by your vehicle or any debris from the crash.
Tank trucks marked with hazardous materials placardsAdded: Commercial passenger-carrying buses.
If your vehicle stalls on a railroad crossing, it is of course a good idea to try to get it off. If you cannot get it off, get away from your vehicle, and call for help. If you see a train coming, walk towards the train, because when the train hits your vehicle, debris is more likely to fly the direction the train is moving. Remember that no vehicle is worth more than your life, and it is almost impossible for a train to stop. Also, if you see a train coming, it is better to run and save yourself and not the vehicle.
A railroad crossing is where the railway tracks cross over a road. It is where a driver of a vehicle must take heed of warning lights that a train is approaching, and the driver must wait until it is safe to proceed over the crossing. In Britain, all railway crossings are either gated or have a barrier, both being automated.
Never do that. Because it is dangerous and there is a high risk that you vehicle will get hit by the train.
No vehicle is allowed to pass a railroad crossing when the gates are down, because it's not an arbitrary rule like a stoplight.... it's a serious danger, and a train moving at speed can take literally miles to stop.
No. In fact, you don't have to stop at most railroad crossings unless you're hauling hazardous materials.
make sure all tracks are clear before crossing. make sure there is room for your vehicle on the other side before starting to cross. it is against the law to drive around or under a crossing gate, either down or being opened or closed. all of the above
Get out of the vehicle, and either run toward the train (stay off the tracks to avoid being hit by your vehicle or any debris from the crash), or run perpendicular to the tracks. Running in either direction protects you from the direct effects of the collision.