To remove the EGR valve on a Saturn, first ensure the engine is cool and disconnect the battery. Locate the EGR valve, which is typically mounted on the intake manifold, and remove any electrical connectors and vacuum hoses attached to it. Then, unbolt the valve using the appropriate socket size and carefully lift it off the manifold. Clean the mounting surface before installing a new valve or gasket to ensure a proper seal.
The EGR valve is located on the drivers side of the head, just above the transmission bell housing. Remove the electrical and vacuum connections, then remove the two bolts that hold the EGR valve to the head. Use a NEW gasket when replacing the EGR valve.
The Saturn EGR valve is attached to the head, directly above the transmission bell housing.
A bad EGR valve in a 2000 Saturn can have several symptoms. The EGR valve can cause misfires, the valve can cause vacuum leak style problems. There could also be an engine knock.
egr valve may be clogged or bent. where do i find the egr valve on my 93 Saturn sc2?
Remove the EGR valve vacuum lines. Remove the EGR valve retaining screws. Wash the EGR valve in hot water. Allow the valve to thoroughly dry before installing it.
no
Remove the wiring harness from your 2000 Dodge Stratus EGR valve. Remove the EGR valve retaining screws. Reverse the process to install the new EGR valve.
The EGR valve is attached directly to the head, on the drivers side. It's a round device that is bolted to the head. It's relatively simple to remove, just disconnect any wiring (there should be plugs) then remove the bolts.
replace the egr valve the one you have is not good
* Remove the air intake duct from the throttle body and air filter housing * Position the hoses and wiring harness aside to access the EGR valve * Disconnect the EGR pipe * Remove the EGR valve mounting fasteners * Remove the EGR valve and gasket from the manifold.Discard the gasket * Using a gasket scraper clean the EGR valve mounting surface
* Remove the air intake duct from the throttle body and air filter housing * Position the hoses and wiring harness aside to access the EGR valve * Disconnect the EGR pipe * Remove the EGR valve mounting fasteners * Remove the EGR valve and gasket from the manifold.Discard the gasket * Using a gasket scraper clean the EGR valve mounting surface
Looking down on the engine, the EGR valve is to the right of the rocker cover, connected to the head.