Remove the two bolts at the top of the shroud, then remove shroud, fan, and motor as an assembly.
Remove the One True Nut (reverse [LH] thread) that holds the fan blade to the motor.
Remove the plastic-screws holding the motor to the shroud.
Pull the blade off the motor.
Use a hammer to disengage the motor from the shroud.
Installation is reverse.
How can I replace the headlamp on a 2000 Saturn SL1
no
this site has pics alsohttp://www.autozone.com/az/cds/en_us/0900823d/80/19/a5/ca/0900823d8019a5ca/repairInfoPages.htm
timing for spark plug wires for saturn sl1 1996
The cam chain tension on a 1996 Saturn SL1 cannot be reset from outside of the motor. It will have to be accessed inside the motor. It is also a good idea to check and make sure it is not simply a broken timing guide.
replace motor Another reason may be that hose on your motor near the top about 2 inches long. i have a 96 sl1 that was burning oil and i replaced that and it quit burning oil.
The thermostat on a 1995 Saturn SL1 is located on top of the motor. The largest hose coming off the radiator will have to be loosened to access the thermostat housing on the motor.
That was the case on my 1994 Saturn SL1
175-70-14
lease gas cap on 2000 sl1
What are the torque specifications and the tightening sequence of the cylinder head bolts on a 1996 Saturn SL1?
see saturnfans.com