0
What else can I help you with?
What is used to specify which bits of an ipv4 address are used for the network identifier and which bits are used for the host identifier?
Subnet Mask
How many network and host bits are available in ipv4?
In IPv4, there are a total of 32 bits in an IP address. The number of network and host bits varies depending on the subnet mask used. Typically, the first part of the bits represents the network portion, while the remaining bits represent the host portion. For example, in a common subnet mask of 255.255.255.0 (or /24), there are 24 bits for the network and 8 bits for hosts.
The Class B IPv4 address network ID is located in the?
The first 16 bits is the location of the Class B IPv4 address network ID based in classful addressing. 16 bit is an expression used for microcomputers with 16-bit microprocessors.
How many bits in an IP V6 address?
128 Bits. An IPv6 address is made up of 8 fields consisting of 16 bits per field. If you multiply 8 x 16 will get 128 bits. Each field is separated by colons unlike IPv4 which was separated by dotted decimal notation. A good link to go to to see the address and how sub-netting is done is on the related links below.
How many bytes are used for an IPv4 Ip address?
IPV4 uses a 4 byte address, whereas the IPV6 uses a 16 byte address. IPv4 has a possible 4,294,967,296 IP addreses. The IPv6 has over 300,000,000,000,000,000,000,000,000,000,000,000,000 possible address's.
How many bits are normally used to identify the subnet in an IPv6 address?
64 bits
Which of the following IPv4 addresses is the loopback address?
127.0.0.1 is the loopback address in IP.... or in the (slightly modified) words of Dorthy Gale when she returned from Oz "There's no place like 127.0.0.1"
Explain what the number 0 and the number 255 are used for in IPv4 addressing?
Number 0 is used at the end of an IPv4 address for network identifiers and number 255 is used at end of an IPv4 for broadcast addresses.
What three facts are true about the network portion of an IPv4 address?
The IPv4 address is identical for all hosts in a broadcast domain. The IPv4 addresse varies in length. The IPv4 address is used to forward packets.
How many bits in a class b ip address are used for the host address?
16
How Many Classes in internet protocal address?
IP addresses are divided into five IP classes:IP address class AIP address class BIP address class CIP address class DIP address class E
How many IP versions are in use?
There are primarily two versions of the Internet Protocol in use today: IPv4 and IPv6. IPv4, which uses a 32-bit address scheme, has been the dominant protocol since the inception of the internet but has a limited address space. IPv6, introduced to address the limitations of IPv4, uses a 128-bit address scheme and provides a vastly larger address space. While IPv4 is still widely used, IPv6 adoption is gradually increasing as the need for more IP addresses grows.
