answersLogoWhite

0

What else can I help you with?

Related Questions

What are principal stresses?

Principal stresses are those stresses that act on principal surface. principal surface here means the surface where components of shear-stress is zero.


How do you convert principal strain value into corresponding principal stresses?

Multiply by Young's modulus


What is the difference betiun major principal stress and minor principal stress?

The major principal stress is the maximum normal stress occurring in an element, and the minor principal stress is the minimum normal stress in the element. Principal stresses act on the principal planes which are perpendicular to each other. Shear stresses are zero on the principal planes.


Who is the principal of Blockhouse Bay Intermediate?

Colin Andrews


What is difference between von mises and principle stress?

Whenever an elastic body subjected to loads in its 3 dimensions, the stresses will get developed along the principal axis of the body. These are the principal stresses. These stress should not exceed the yield stress of the material. Von Mises (1913) postulated that, even though none of the principal stresses exceeds the yield stress of the material, it is possible for yielding of the same from the combination of stresses. The Von Mises criterion is a formula (refer any textbook which content failure theories for Ductile Materials) for combining these 3 stresses into an equivalent stress, which is then compared to the yield stress of the material.


What has the author C D Irving written?

C. D. Irving has written: 'A Programmed introduction to principal stresses and the Mohr stress circle' -- subject(s): Programmed instruction, Strains and stresses, Stress-strain curves, Programmedinstruction


What is principal stress?

principle stress=pure normal stress no shear stress ... ...simpler terms, there are only stresses acting in and out of planes not directly on them....hope that helps


Counting cardinal and intermediate diretion's how many in all?

There are a total of eight principal directions when considering both cardinal and intermediate directions. The cardinal directions are north, south, east, and west, while the intermediate directions include northeast, northwest, southeast, and southwest. Thus, when combined, the total is 8 directions.


Principal plane in strength of material?

the plane in which three mutually perpendicular stresses act and the resultant of all is purely normal stress . in this plane value of shear stress is zero


What is the solution for this question for the of plane stress given determine the principal planes principal stresses and maximum shear stressshear max equals 50mpashear x equals 100mpashear y equ?

To determine the principal stresses and maximum shear stress for a plane stress condition with given shear stress ((\tau_{max} = 50 , \text{MPa})), (\sigma_x = 100 , \text{MPa}), and (\sigma_y = 0 , \text{MPa}), we first calculate the principal stresses using the equations: [ \sigma_1, \sigma_2 = \frac{\sigma_x + \sigma_y}{2} \pm \sqrt{\left(\frac{\sigma_x - \sigma_y}{2}\right)^2 + \tau_{xy}^2} ] Substituting the values yields (\sigma_1 = 125 , \text{MPa}) and (\sigma_2 = -25 , \text{MPa}). The maximum shear stress can be calculated as (\tau_{max} = \frac{\sigma_1 - \sigma_2}{2} = 75 , \text{MPa}).


How do you spell the plural of stress?

The plural of "stress" is "stresses."


What are the stresses on bridges?

There are a number of stresses inflicted upon bridges. Some of these stresses include compression, tension, as well as bending.