0
What else can I help you with?
How many types of control units?
There are primarily two types of control units in computer architecture: hardwired control units and microprogrammed control units. Hardwired control units use fixed logic circuits to control signals and operations, making them faster but less flexible. Microprogrammed control units, on the other hand, use a set of stored instructions (microinstructions) to generate control signals, allowing for easier modification and complexity in design. Each type has its own advantages and is suited for different applications.
Is it possible to design a hardwired control unit associated with microprogram?
Yes, it is possible to design a hardwired control unit that works in conjunction with a microprogram. In this configuration, the hardwired control unit generates control signals based on the microprogram's instructions, allowing for more complex operations than a purely hardwired approach. This hybrid design can leverage the speed of hardwired logic while still using microprogramming to manage complex instruction sets or sequences. However, it can also increase design complexity and may require careful integration to ensure efficient operation.
What has the author Robert Austin Ingalls written?
Robert Austin Ingalls has written: 'Logical design of a microprogrammed special-purpose computer' -- subject(s): Electronics
What are the benefits of using a non hardwired wall sconce in a room design?
The benefits of using a non hardwired wall sconce in a room design include flexibility in placement, ease of installation, and the ability to change the lighting layout without the need for electrical work.
What are the advantages of design?
There are various advantages of doing a design before setting out to make something. If you do a good design you will be sure it works.
What are the advantages of drawing flowchart?
List the advantages of design diagrams. List the traditional design tools.
What are the advantages of using fixed gear bikes for urban commuting?
Fixed gear bikes have advantages for urban commuting such as simplicity, low maintenance, lightweight design, and better control over speed and braking.
What are the differences between hardwired control design and microprogrammed control design?
A hardwired control unit has a processor that generates signals or instructions to be implemented in correct sequence. This was the older method of control that works through the use of distinct components, drums, a sequential circuit design, or flip chips. It is implemented using logic gates & flip flops. It is faster, less flexible & limited in complexity A micro programmed control unit on the other hand makes use of a micro sequencer from which instruction bits are decoded to be implemented. It acts as the device supervisor that controls the rest of the subsystems including arithmetic and logic units, registers, instruction registers, off-chip input/output, and buses. It is slower, more flexible & greater complexity
What is timing and control in computer architecture?
Timing pulses are used in sequencing the micro-operations in an instruction. For example, when LDA instruction is executed, the memory is read operation is performed in timing pulse T1 and memory writer operation is performed in timing pulse T2. Now the combination of the signal LDA and T1 can be used as a control signal for performing read operation. Similarly, the combination of the signal LDA and T2 can be used as a control signal for performing write operation.A master clock generator is used for controlling the timing for all register in a computer system. A state of a register cannot be changed by a clock pulse until it is enabled by the control signal, which are generated in the control unit and provide control inputs for multiplexers, processor register, and micro-operations. The control organization is of two types; hardwired control and micro-programmed control.Hardwired ControlIn a hardwired control, the control signals are generated by using the collection of combinational circuits. The main advantage of the hardwired control is that, it can be optimized to produce a fast mode of operation. Whenever a change or modification is to be done in the design, then the wiring among the various components needs to be done. Micro-Programmed ControlIn a micro-programmed control, a control memory is used for storing control information which is also programmed for initiating the sequence of micro-operations. Whenever any change or modification is required in the design, it can be done by updating the micro-program in the control memory.
What are the advantages of using a triple triangle bike frame design?
The triple triangle bike frame design provides increased strength and stability, better handling and control, and improved power transfer while riding.
What are the advantages of using a fixed gear road bicycle for commuting in the city?
Using a fixed gear road bicycle for city commuting offers advantages such as simplicity, low maintenance, lightweight design, and better control in traffic.
What are the benefits of using hardwired lights in a home or office setting?
Hardwired lights in a home or office setting offer benefits such as reliability, energy efficiency, and a more polished appearance. They are typically more durable and long-lasting compared to other lighting options, providing consistent illumination without the need for frequent maintenance. Additionally, hardwired lights can be integrated into the overall design of a space for a sleek and professional look.
