6 mhz.
6 Megacycles in analog. This includes picture, sound and guard bands.
A low bandwidth signal does not have more power.
Signal Bandwidth is the Bandwidth of particular frequency at which signal is transmitted and Bandwidth of spectrum which can able two show number of signal between Intrest of frequency.
facsimile signal requires a bandwidth of only about 1000 Hz
Most likely it's because the satellite amplifier doen't have the bandwidth or frequency range to cover the DTV signal.
The signal with a frequency of 200Hz has a wider bandwidth compared to a signal with a frequency of 100Hz. Bandwidth is determined by the range of frequencies present in a signal, so a higher-frequency signal will have more frequency components and thus a wider bandwidth.
"Essential bandwidth" is the portion of the signal spectrum that encompasses most of the energy of the original signal in the frequency domain.
With full double sideband AM the bandwidth of the modulated signal is twice that of the baseband information signal. With suppressed carrier single sideband AM the bandwidth of the modulated signal is identical to that of the baseband information signal. With vestigial sideband AM the bandwidth of the modulated signal is somewhere between the above two cases, depending on how much of the vestigial sideband is included.
In reality, digital TV doesn't have extra bandwidth. It uses the same (or a little less) amount of bandwidth as standard NTSC television signal, but since it's digital in nature, they are able to multiplex up to eight TV signals within the same amount of transponder space. So yes, it can broadcast more channels.
distorttion
In Amplitude Modulation (AM), specifically in the case of Double Sideband Suppressed Carrier (DSB-SC) or Full Carrier (DSB-FC) AM, the required bandwidth is twice the bandwidth of the modulating signal. If the modulating signal has a bandwidth of B Hz, the bandwidth required for AM would be 2B Hz. This is because both the upper and lower sidebands of the carrier wave are utilized in the modulation process, each consuming bandwidth equivalent to the original signal.
no,because generally the lower frequency side existed for lower bandwidth,and higher frequency side existed higher bandwidth,so thus we can say that lower bandwidth has generally has lower power as compared to higher bandwidth.