MVA is the aparant power.
MVA is the apparent power. MVA=( MW+ MVAr)1/2
No, mvar (megavolt-ampere reactive) is a unit of apparent power while MVA (megavolt-ampere) is a unit of real power. Mvar is used to measure reactive power, while MVA is used to measure total power (both real and reactive).
Transformer does not convert MVA to KV. MVA is unit of power, where as KV is unit of Voltage. Transformer converts voltgae. Step up or Step down.
To convert megavolt-amperes (MVA) to megawatts (MW), you typically use the formula: MW = MVA × Power Factor. If the power factor is not specified, a common assumption is 1 (for purely resistive loads), which would mean 55 MVA equals 55 MW. However, if the power factor is less than 1, the MW value would be lower than 55.
The power in a 15 MVA (15000 KVA) transformer depends on the power factor. You did not specify the power factor, so I will assume a power factor of 0.92. Simply multiply MVA by PF and you get 13.8 MW.
There are two concerns here regarding loading on transformers of this size. First is the difference between MVA and MW. MW is just real power -- watts. MVA is total power which includes real power (MW) and reactive power (MVAR).--- http://en.allexperts.com/q/Electric-Power-Utilities-2405/operation-limit-oof-power.htm
800 MVA
mw/mva=power factor reactive power(Q)=I2XL or E2/XL where XL= REACTANCE apparent power = square root of (MW2 + MVAR2 )
MVA we are so tight MVA not supposed to fight MVA we are so cool MVA we act like fools. MVA stands for Martina Victoria and Anaya. Bianca not included
You would have to know the Power Factor, normally designated PF. MVA x PF = MW. If the PF is unity then MVA = MW. A PF of UNITY suggest the load is purely resistive with neither capacitive nor inductive components in the load or source. Of course this can mean such components have been balanced artificially.
Do you mean 'megavolt ampere' (MV.A) or 'millivolt ampere' (mV.A)? By using the incorrect symbol ('mva'), this is not clear.To determine the apparent power, in volt amperes, you divide the true power, in watts, by the power factor of the load. One volt ampere is one-millionth of a megavolt ampere ('MV.A' -not 'mva') -assuming you don't mean 'millivolt ampere' ('mV.A')!
In a 1 megawatt (MW) generator, the unit of power is given in terms of megawatts, which represents one million watts. A megavolt-ampere (MVA) is a unit of apparent power equal to one million volt-amperes. Therefore, in a 1 MW generator, the apparent power rating would also be 1 MVA, as the apparent power rating is typically equal to the real power rating in a generator with a power factor of 1.