The power in a 15 MVA (15000 KVA) transformer depends on the power factor. You did not specify the power factor, so I will assume a power factor of 0.92. Simply multiply MVA by PF and you get 13.8 MW.
transformer action doesn't depend on power factor that is why we indicate its rating in KVA
Transformers are rated in VA or kVA. That is because the voltage is limited by the power loss in the magnetic core, and the current is limited by the power loss in the resistance of the windings. The rated voltage times the rated current gives the transformer's rating in kVA.
It depends on the power factor of the load, but for a load power factor of 0.7 on a 2000 kVA transformer the real power and reactive power are both 1400 kilo (watts and VAR). So a 1400 kVAR capacitor on the load would restore the power factor to 1, allowing 2000 kW to be drawn instead of only 1400 kW.
cost of 630kVA transformer
The kVA rating will be listed on the transformer's nameplate, which is usually on the front of the transformer. The 480v to 120v is irrelevant, because many transformers with different kVA ratings convert 480 volts to 120 volts. The kVA ratings can be different and thus affect the rated current through the transformer.
transformer action doesn't depend on power factor that is why we indicate its rating in KVA
The result is that the transformer runs cool and contented. The '250 KVA' rating on the transformer is its maximum ability to transfer power from its input to its output without overheating, NOT an amount of power always running through it. If the 3 KVA load happens to be the only thing connected to the transformer at the time, then only 3 KVA flows into the transformer from the primary line, and only 3 KVA leaves the transformer secondary.
The kVA represents the power-handling capability of the transformer.So, if you were using a 1 kVA transformer at 110 volts, you could roughly estimate the maximum output to be 9 amps.
Transformers are rated in KVA because that is a more accurate way to measure their capacity requirements. KWH is apparent power, while KVA is true power, and the ratio between them is power factor. The power factor is a function of the load, and not the transformer, so a poor power factor would make KWA look less to the transformer while, in fact, the true power, if not met by the transformer, could overload the transformer.
The 3 kVA transformer will weigh double the 1.5 kVA transformer.
the unit of generators power is KVA becoze the kva is the power that contain the active power (KW) and the reactive power mean that the name plate of any generator must contain the rated kva of it (like the transformer P (KW) = P (kva) * cos fi P (KW) = V I cos fi for single phase P (KVA) = V I when cos fi closed to 1 this will increase the useful power that exit from the generator or transformer with my pleasure
How long's a piece of string? It obviously depends on how big the transformer is!
Transformers are rated in VA or kVA. That is because the voltage is limited by the power loss in the magnetic core, and the current is limited by the power loss in the resistance of the windings. The rated voltage times the rated current gives the transformer's rating in kVA.
because we dont know power factor of the secondary laod
The power factor is only taken into consideration when the Kilowatts of a transformer is used.
In 1600 kva transformer we provide NGR (Neutral grounding resistance)
Depends on the kva rating of the devices to be tested using a transformer.