0
What else can I help you with?
What kind of wrench do you need to removed the oil filter?
a wrench with a metal band that wraps around oil filter that ables you to turn aka an oil filter wrench
What kind of oil filter wrench do you need for a 1999 Honda civic?
any oil filter wrench - it warps around the filter and you can adjust it - the wrench looks like a giant ring
What wrench is used to remove 2007 RAV4 oil filter?
In order to remove the oil filter from a 2007 Toyota RAV4 you need to use an oil filter wrench. This wrench is a specialty to Toyota.
Does the oil filter for a 2000 Chevy cavalier need a special wrench?
No..maybe a oil filter wrench to remove it, but, install it by hand (HAND TIGHT)
Will a standard filter wrench fit a 2008 Toyota Highlander oil filter?
No. 2008 highlander has a aluminum filter housing you need to remove with a special type of filter wrench. I was able to tap mine loose without a wrench but it could be at 24n-m tight which is difficult to loosen.
What is the wrench size to take off the frant brake pads of a 2001 Saturn LS?
You need a 12 mm wrench, not Allen key.
How do you change the oil on a 2004 Saturn Ion?
You need a 9/16" box end wrench for the drain plug. The filter requires a special socket to remove the cap. I used to use a 1 1/4" open end wrench until I bought the socket from Snap-On.
How do you BEST remove the OIL filter on a 99 Sunfire?
Just unscrew the filter. If you cannot remove it with your hands, it was put on too tight, which is common, as most people tighten them too much. You will need to use a good filter wrench. The type wrench you will need depends on how much room you have. Oil the gasket & Put the new filter back on and only tighten it 3/4 turn after the filter makes contact with the mounting surface. By doing this you will not need a filter wrench when removing the filter next time. 3/4 turn is plenty tight and any more is too much.Just unscrew the filter. If you cannot remove it with your hands, it was put on too tight, which is common, as most people tighten them too much. You will need to use a good filter wrench. The type wrench you will need depends on how much room you have. Oil the gasket & Put the new filter back on and only tighten it 3/4 turn after the filter makes contact with the mounting surface. By doing this you will not need a filter wrench when removing the filter next time. 3/4 turn is plenty tight and any more is too much.
How much engine oil you need for Saturn 2002 L-300?
You will need 5 quarts to change the oil and filter in a Saturn.
What tools are needed to change fuel filter on a 1989 Honda Accord?
oil filter toolYou would need a oil filter wrench, a jack that's all you need to change the filter.
How do you remove the harmonic balancer on a 1998 saturn sl2?
To remove the harmonic balancer on a 1998 Saturn SL2, you will need to use a harmonic balancer puller tool. First, remove any surrounding components that may impede access. Then, attach the puller to the balancer and use a wrench to slowly tighten the puller until the balancer comes off.
Change Oil filter cartridge Saturn vue 2008 2.4L Eng?
To change the oil filter on a 2008 2.4L Vue or Sky you need a special short 32mm (1.25in) socket with a 3/8 in drive. Here is a package that I found on eBay for the filter element and socket. Good luck! http://cgi.ebay.com/ebaymotors/GM-oil-filter-&-socket-wrench-32mm-Saturn-L-LS-LW-Vue-_W0QQitemZ120330902655QQcmdZViewItemQQimsxZ20081109?IMSfp=TL0811091110006r29122
