The BCM is mounted under the Saturn's dash. It is located on the drivers side near the kick panel.
Behind the glove compartment in the dash cavity. The glove compartment will need to be removed. The new BCM has to be programmed after installation.
how to use bcm to reset change oil light
The BCM in an L series car is in the glove box You have to remove the storage piece and the the door of the glove box off it is mounte on top of the storage bin .
There is no BCM in a 99 Saturn......2000 it's under the dash pad
It does not have one.It does not have one.
what does a bcm in a 2000 cavalier control
were is the bcm located on a 2000 monte carlo
To program the Body Control Module (BCM) on a 2000 Saturn LS1, you'll typically need a compatible OBD-II scanner that supports BCM programming. Connect the scanner to the vehicle's OBD-II port, turn on the ignition without starting the engine, and follow the scanner's prompts to access the BCM settings. Ensure you have the correct calibration file if required, and complete the programming process as instructed by the scanner. Always consult the vehicle's service manual for specific procedures and precautions.
It does not have a BCM.
The BCM (Body Control Module) controls most electronics not related to the drivetrain, amongst others the anti-theft system, interior and exterior lights, door chimes and the keyless entry system.
under dash left side bolt to firewall with bracket tcm and seperate bcm boxes