To open the bonnet of a Ford Tourneo Connect, first, locate the bonnet release lever inside the vehicle, typically found on the driver's side near the footwell. Pull the lever to release the initial latch. Then, move to the front of the vehicle, slide the safety catch (usually located under the centre of the bonnet) to the side, and lift the bonnet open. Use the prop rod, if available, to secure the bonnet in an upright position.
Hi,I assume that the bonnet is the same as the Connect and Focus?If it is, there is a lock on the bonnet/hood. Either behind the badge or the flip up panel
Open the door with your key and pull the bonnet release.
On the bonnet, slide the Ford oval and insert the ignition key into the lock located there
open the bonnet
open bonnet
the bonnet lever is under the steering wheel it should have a red handle
at a decimal point
the Ford badge on the front of the bonnet lifts up to reveal the bonnet release lock. Use the ignition key and turn to position 1, lift the bonnet, then turn to position 2 to fully release
In addition to using the interior release lever, you can open the bonnet of a Ford Fiesta by locating the secondary latch under the front edge of the bonnet. To do this, stand in front of the vehicle, slide your hand under the centre of the bonnet, and feel for the latch. Once you find it, pull it upwards while simultaneously lifting the bonnet. Always ensure the bonnet is securely propped open before working under it.
go to the ford badge on the front of the car , slide it up from the right ,insert your car key turn once to the left then turn to the right and the bonnet will open
There is a keyhole hidden behind the Ford logo in the grille Take the transit door key come to the front of the van and look at grill under the bonnet their you will find a place where this key can be inserted and turn this realises the lock and the bonnet will pop open.