0
What else can I help you with?
What kind of oil does a 158cc Briggs and stratton mover take?
10w - 30
What is the specific spark plug gap for a Briggs and stratton 500 series 158cc push lawn mower?
.32
What kind oil does a huskee 158cc mower use?
Use 30w synthetic or 10w30 synthetic. 30w is preferred.
How many horsepower does 158 cc equal?
I'm looking to purchase a new lawnmower. It says it's 158cc. About how much horsepower is this?
What is the horse power of Briggs and Stratton 158cc?
The Briggs & Stratton 158cc engine typically produces around 5.5 to 6.5 horsepower, depending on the specific model and application. This engine is commonly used in lawn mowers and other outdoor power equipment. For precise horsepower ratings, it's best to refer to the manufacturer's specifications for the particular model in question.
What is oil capacity for Briggs 158cc engine?
The oil capacity for a Briggs & Stratton 158cc engine is typically around 20 ounces (or approximately 0.6 liters). It's important to check the specific model's owner’s manual for precise specifications, as capacities can vary slightly depending on the engine variant. Always ensure to use the recommended oil type for optimal performance.
What kind of oil does a Briggs and stranton 158cc mower take?
SAE 30 weight in the summer or SAE 10w30 if you use it in cool temperatures. I highly recommend synthetic oil in any air cooled engine.
How much oil does it take for a Briggs and stratton 158cc push mower?
A Briggs & Stratton 158cc push mower typically requires about 18 to 20 ounces of oil for its engine. It's essential to use the recommended oil type, usually SAE 30 or 10W-30, depending on the operating temperature. Always check the owner’s manual for specific guidelines and ensure the oil level is between the minimum and maximum marks on the dipstick. Regular oil changes help maintain engine performance and longevity.
How adjust the carborator on a 158cc Briggs?
To adjust the carburetor on a 158cc Briggs & Stratton engine, first ensure the engine is off and cool. Locate the adjustment screws, typically labeled "H" for high speed and "L" for low speed. Start the engine and let it warm up, then adjust the "L" screw for smooth idle and the "H" screw for optimal acceleration, turning each screw clockwise to enrich the mixture and counterclockwise to lean it. Make small adjustments and test the engine's performance after each change.
How many cc is a 5 hp motor?
Best guess is about 200cc. Little bit more or less depending on engine design. Displacement does not directly translate into HP. Bad best geuss...5.0 =158cc and 190cc is a 6.75hp
What is a simile for fast?
as fast as a cheetah running from extinction
Is an otter fast or slow moving?
fast. not that fast but fast.
