answersLogoWhite

0

What else can I help you with?

Related Questions

How many amp does it take to operate an electric furnace?

Electric furnaces are rated in Kilowatts. The following formula will let you figure it out. Watts = amps x volts. For eg. a 10 Kw furnace draws 10000 watts. amps = watts/volts. 10000/240 = 41.6 amps. If your furnace differs from this example, just plug in your wattage and you will have your answer.


Will a 7000 starting amps and 10500 running amps run a 78 amp furnace?

In the electrical trade the only time there is a reference to start and running amps is when dealing with motors. The running amps is always lower than the starting amps. A 78 amp electric furnace will take a 100 amp service for it to operate and be within the electrical code guide lines.


Why does the blower take 2 minutes to start on forced air furnace?

There is a delay on the fan to allow the furnace to get hot so as not to blow cold air into the home at start up. There is also an `OFF` delay, where the fan runs for a minute or so after the flame shuts off. This is to cool down the furnace.


How many amps of electricity would it take to knock a person out?

0.0001 amps will stop your heart if you are fully grounded.


How many amps does a 240v electric heater take?

The question is not relevant. 240 volts refers to the "potential", and amps refers to the current. Potential * current = watts, or energy. You can have 240 volts at 1 amp, which will result in 240 watts, or you can have 240 amps at 1 volt which would also result in 240 watts.


How many volts does it take to kill a human?

it doesn't matter how many volts pass through your body, its the amps as little as 0.1 amps can kill a human


Which fuel is more efficient in a forced air furnace heating oil or kerosene?

The kerosene is a lighter oil. I think you would get more BTUs out of the heating oil. Just make sure that you are using the right fuel for the furnace that you have. Most now days would take heating oil.


How many amps can an LED take?

An LED typically consumes around 20mA (0.02 amps) of current to operate. Exceeding this current limit can damage the LED.


How do you figure how big a furnace do to heat a home?

You take the size of your home in square feet and times it by how many rooms you have. A 70,000 BTU furnace will heat a house 1600 square feet.


How many amps does it take to run a 1000 watt bublb?

To answer this question the voltage needs to be known.


How many amps do 8 40 watt fluorescent lights take?

It depends on the voltage and whether the lamps are actually 40 watts or 40 watt equivalent. Watts / volts = amps


How many amps does one light use?

You just have to divide the watts by the voltage to find the amps. For example 60 watts on a 120 v system would take ½ amp.