25 gallons per hour.
A machine hour rate is the cost of one machine working for one hour. This is used in calculating overhead costs to work in process as opposed to using labor hours.
A Boeing 747-200 burns about 25,000 Lbs of fuel per hour. That would total 100,000 lbs in 4 hours. As I recall, the max fuel load is 330,000lbs.
how to calculate machine hourly rate
A320 avearge fuel consumption is 2400 kg per hour
To check diesel consumption for a bulldozer, you can measure the fuel used over a specific period or distance of operation. This can be done by filling the fuel tank to a known level, operating the bulldozer for a set amount of time or distance, and then refilling the tank to see how much fuel was consumed. Additionally, monitoring the machine's hour meter can help correlate fuel usage with operational hours. Keeping detailed logs of fuel purchases and usage can also provide insights into overall consumption trends.
A 20 kVA generator typically consumes between 4 to 6 liters of fuel per hour, depending on its load, efficiency, and type of fuel used (diesel, petrol, etc.). At full load, the fuel consumption can be closer to the higher end of this range. It’s important to refer to the specific generator's manual for accurate consumption figures.
In most cases I have found that the carburettor is leaking fuel into the engine. This can be caused by a sticking float needle. Ensure that if your machine has a fuel tap, it is turned off any time the machine is not being used.
always mix your fuel with your oil before adding it to any machine.
for a softball pitching machine varies from $140 to$300
The fuel consumption of an excavator can vary significantly based on its size, model, and operating conditions. On average, a mid-sized excavator may use between 10 to 20 liters of fuel per hour, while larger models can consume 20 to 40 liters or more. Factors such as the type of work being performed and the efficiency of the machine also play a crucial role in determining fuel usage. Always refer to the manufacturer's specifications for the most accurate information.
A Komatsu 300 will use 5 to 8 gallons of fuel an hour. This number will stay closer to the 8 gallon per hour range is used conservatively.