the ones from poundland and pound saver
hope this helps
That would be right next to the blinker fluid hose that goes into the block.
bulb goes crazy
The thing that a bulb goes into is called a socket. It is the part that connects the bulb to the electrical supply in lighting fixtures.
Electrical goes in. Electromagnetic (heat and light) come out.
The energy that goes in is electrical energy; the energy that leaves it is visible light, as well as heat.
Parallel circuit
When a light bulb is on, electrical energy goes into the bulb and is converted into light energy and heat energy. Some of the electrical energy may also be converted into a small amount of sound energy due to vibrations in the bulb.
That's a serial connection.
That bulb goes out. The other bulbs remain on.
First let headlights cool down if they have been on. Open hood. The back of each headlight has a blue plug. Remove blue plug then turn gray ring 1/4 turn counterclockwise to unlock the bulb. Pull bulb and insert new bulb. Bulb goes in with flat side up. CAUTION: Wear eye protection and gloves because bulbs can explode. Avoid touching the glass area of the bulb. Reverse removal process to install.
The failed bulb breaks the circuit so no current can flow - so the other bulb goes out (but is OK).
it is located behind the distributor on top of the block there is the oil sending unit and a oil sending switch with a wire that goes to your choke if it is electric trace it back and you will find it...