0
What else can I help you with?
Why it is important to correctly rate and select a cable for the application?
Unknown
What do you do when computer boots correctly network cable is working link lights not working network icon not visible in tray?
Ask teacher for answers
You can select the cable length in the option box.?
You can select the cable length in the option box.
Can you use armored cable to wire 277 volt lights?
Yes, armored cable can be used to wire 277 volt lights. However, be sure to select the appropriate type and size of armored cable rated for the voltage and current requirements of the lighting system to ensure safety and compliance with electrical codes and regulations.
What is the function of cable select jumper setting?
The function of cable select jumper setting is to let the cable select which drive takes priority ("master") and which one comes after ("slave").
How do I wire outdoor lights properly?
To wire outdoor lights properly, first, make sure to turn off the power to the area where you will be working. Then, run a weatherproof cable from the power source to the lights, making sure to bury it at least 18 inches deep. Connect the cable to the lights using waterproof wire connectors, following the manufacturer's instructions. Finally, test the lights to ensure they are working correctly before burying any exposed wires.
How do you select a cable size?
according to use
Why is it important to correctley rate and select a cable for application?
cuz' stone cold said so!
What is the drive nearest motherboard when using an 80-conductor cable-select cable?
Master.
When using an 80-conductor cable-select cable the drive nearest the motherboard is the?
Answer: When using an 80-conductor cable-select cable, the drive nearest the motherboard is the master, and the drive farthest from the motherboard is the slave. You can recognize a cable-select cable by a small hole somewhere in the the data cable or by labels (master or slave) on the connectors. -CompTIA A+ Guide to Hardware, Managing, Maintaining, and Troubleshooting Fifth Edition 2010 copyright - Jean Andrews, Ph.D.
How do you unchip an Xbox It needs to be sent back to Microsoft to be fixed of three red lights And if the seal is broken am I in a bother?
3 red lights only means your AV Cable is not correctly connected...I had this problem and rang a Tech he told me to check the AV connections..Problem solved.
Can you use a router with cable Internet?
Yes you can. Just connect it to the cable box, and set it up correctly.
