according to use
4cx95mm aws which size of cable gland
The size of a cable needed for 3.5KW shower can range from 4.0mm.
25mm cable
To calculate the cable size for a 100 kW load, you would need to consider factors such as the voltage of the system, the type of cable insulation, the ambient temperature, and the installation method. The cable size is typically determined by the maximum current the cable will carry without overheating. Using the formula: Cable size (mm²) = (2 x L x I x R) / (√3 x V x cosΦ), where L is the cable length, I is the load current, R is the resistance of the cable, V is the voltage, and cosΦ is the power factor, you can calculate the appropriate cable size for the 100 kW load.
how to know dc cable sizes
16mm2
You can select the cable length in the option box.
The function of cable select jumper setting is to let the cable select which drive takes priority ("master") and which one comes after ("slave").
Master.
To answer this question the size of the cable or the amperage of the load is needed to calculate the correct wire size and connectors to fit the cable.
Answer: When using an 80-conductor cable-select cable, the drive nearest the motherboard is the master, and the drive farthest from the motherboard is the slave. You can recognize a cable-select cable by a small hole somewhere in the the data cable or by labels (master or slave) on the connectors. -CompTIA A+ Guide to Hardware, Managing, Maintaining, and Troubleshooting Fifth Edition 2010 copyright - Jean Andrews, Ph.D.
4cx95mm aws which size of cable gland
To use a cable clamp effectively, first, identify the size of the cable and select a clamp that fits securely. Place the clamp around the cable and tighten it using a screwdriver or wrench until it is snug but not overly tight. Make sure the clamp is positioned securely and does not damage the cable. Check the clamp periodically to ensure it remains secure and adjust as needed.
Unknown
The cable size is : 4*25 mm2
The size of a cable needed for 3.5KW shower can range from 4.0mm.
Yes, armored cable can be used to wire 277 volt lights. However, be sure to select the appropriate type and size of armored cable rated for the voltage and current requirements of the lighting system to ensure safety and compliance with electrical codes and regulations.