The size of a cable needed for 3.5KW shower can range from 4.0mm.
7.2kW shower = 32 Amp fuse = 6 mm2 cable size7.5kW shower = 40 Amp fuse = 10 mm2 cable size8.5kW shower = 40 Amp fuse = 10 mm2 cable size9.5kW shower = 40/45 Amp fuse = 10 mm2 cable size10.5kW shower = 45 Amp fuse = 16mm2 cable size
4cx95mm aws which size of cable gland
This is a voltage drop to establish wire size question. For a correct answer to this question two values are needed. One value needed is the voltage and the other is whether it is three phase or a single phase installation.
25mm cable
To calculate the cable size for a 100 kW load, you would need to consider factors such as the voltage of the system, the type of cable insulation, the ambient temperature, and the installation method. The cable size is typically determined by the maximum current the cable will carry without overheating. Using the formula: Cable size (mm²) = (2 x L x I x R) / (√3 x V x cosΦ), where L is the cable length, I is the load current, R is the resistance of the cable, V is the voltage, and cosΦ is the power factor, you can calculate the appropriate cable size for the 100 kW load.
7.2kW shower = 32 Amp fuse = 6 mm2 cable size7.5kW shower = 40 Amp fuse = 10 mm2 cable size8.5kW shower = 40 Amp fuse = 10 mm2 cable size9.5kW shower = 40/45 Amp fuse = 10 mm2 cable size10.5kW shower = 45 Amp fuse = 16mm2 cable size
typically shower drains are 2"
There are lots of fittings available that are needed to fit a corner shower rod. The only problem is is that one has to know the right size of the fittings that are needed. So it depends on the size of the corner shower rod as well.
To answer this question the size of the cable or the amperage of the load is needed to calculate the correct wire size and connectors to fit the cable.
For a 9.5kW shower, a 10mm twin and earth cable would typically be used to supply power to the shower to ensure it can handle the electrical load safely and effectively. It is important to consult a qualified electrician to determine the appropriate cable size for your specific installation.
To answer this question the voltage is needed.
To answer this question the voltage of the genset is needed.
it is 5mm
You need to know the amperage requirement of the pump and then you can calculate the wire size.
The largest size of twin and earth cable available is typically 16mm² in the UK market. This size is commonly used for higher current applications such as cooker circuits or shower circuits.
To answer this question a voltage is needed.
A 134 kVA cable typically refers to the size of cable required for a 134 kilovolt-ampere electrical load. The size of the cable needed will depend on factors such as the length of the cable run, the voltage drop allowed, and the type of insulation and conductor material required to safely carry the current. It is recommended to consult with a qualified electrical engineer or contractor to determine the specific cable size needed for your application.