that is called solar cell which converts light(photons) to D.C voltage .the amplitude of voltage depend on how many solar cell are you joined in seies a solar cell normally produce 0.6-0.7 V D.C
There's no correlation between the voltage, the current, and whether the source is AC or DC.
A DC to DC converter is a power converter that converts a current from one voltage unit to another. Popular uses of a DC to DC converter are cellular phones and laptop computers.
A battery charger is a DC voltage source followed by some kind of regulator that controls the current flowing into the battery. Depending on the type of battery, this regulator might be simple, based on current and/or voltage, or it might be complex, based on voltage slope. A transformer rectifier is simply one of the part of the DC voltage source.
No, it will cause the bulb to blow. A 12 volt light is DC voltage and your home outlet is AC voltage.
"The application of a DC voltage in forward bias mode to a circuit containing a diode will result in a specific DC voltage and DC current across the diode, known as the DC operating point, Q point (VDQ, IDQ)." source: http://www.doe.carleton.ca/~achar/notes_2507/Lab3_tutorial_diodes.pdf
either a rectifier or a motor generator
first it converts ac to dc as rectifier But the required dc voltage is obtained by taking average of on & off DC input voltage.
The voltage source that is applied to them is the difference between AC and DC light bulbs.
With an AC and a DC voltage source in series, the DC voltage can be added to the RMS value of the AC voltage to give the effective voltage.
Dc chopper is a static device which converts constant dc source to variable dc.
Dc chopper is a static device which converts constant dc source to variable dc.
The two sources add together, imposing a DC bias to the AC source.
A regulator is referring to a regulator rectifier which converts the ac voltage put out by the stator to dc voltage and regulates it to a consistent voltage usually 12-14 volts dc.
the answer is Rectifier. it converts ac voltage into dc which can apply to the dc device
Because a flash light is a portable piece of equipment, it operates on batteries. The power source is a DC voltage.
There's no correlation between the voltage, the current, and whether the source is AC or DC.
To reverse the direction of current.it converts ac voltage produced at the armature to the pulsating DC voltage at brush terminals