0
1. A three phase transformer with HV side star connected and LV side delta connected results in economical design.
2. However, if star winding is required on the LV side due to load / safety requirements, then it is common to connect the HV side as delta. See next item to know why a delta winding is necessary.
3. Delta winding provides a path for third harmonic current present in the magnetising current due to core saturation. Hence, delta winding acts a thrid harmonic filter. This will help to eliminate non-sinusoidal voltage on transformer load terminals. This is an important feature of transformer design. Hence, in practice, all Transformers will invariably have a delta winding.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
What are the Advantages and disadvantages of delta and wye transformers?
copper losses Comment: Advantages: Their operation is silent They have a high efficiency They are relatively safe Disadvantages Expensive Copper losses and hysteress losses
What are the advantages of power transformers over voltage transformers?
Power transformers can be used for power transformation. Voltage transformers are not suitable for high power applications.
Why is identification of the vector group of transformer important?
Vector group means it defines the primary & secondary side connection type of the transformer.For example DY says D for the delta connections (windings connected between two phases) & Y for the star connections (windings connected between two phases). That's why identification of the vector group of transformer is important.AnswerVector groups specify whether two or more three-phase transformers can be paralleled with each other. In order to do so, their angular displacements must be the same. Transformer connections listed in the Vector Group tables, categorise transformer connections in terms of their angular displacements.
An advantage of off-peak electricity?
For the electricity companies the advantages are : - Transformers dont damage (Transformers are most efficient at full load) - Constant use of electricity meaning that theres no need for storing electricity (even though its near impossible to store AC) For the customer the advantages are: - Cheaper Electricity at off peak times. (the reason its cheaper is to encourage people to use off peak more so that the transformers run at maximum efficiency - hence not damaging them)
What is the advantage of an open delta transformer?
An open-delta connection is a method of providing a three-phase supply, using two single-phase transformers. It is particularly useful if , say, one single-phase transformer, part of a three single-phase transformers forming a three-phase transformer bank, becomes damaged -allowing the two remaining transformers to provide a temporary three-phase supply to the load. The drawback with this connection is that the capacity of the transformer bank is reduced, and it can only provide a lower load current.
What are the Advantages and disadvantages of delta and wye transformers?
copper losses Comment: Advantages: Their operation is silent They have a high efficiency They are relatively safe Disadvantages Expensive Copper losses and hysteress losses
What are the advantages of power transformers over voltage transformers?
Power transformers can be used for power transformation. Voltage transformers are not suitable for high power applications.
What are the advantages of dry type over oil type transformers?
what are the major advantages of dry type transformers over oil type transformers
How do you change 3 1phase transformer in to 3 phase?
Three-phase transformation can be obtained using two Transformers, by connecting them in what is known as an 'open delta' connection.
How do you find angular displacement of transformer?
Angular displacement (sometimes called phase displacement) applies to three-phase transformers, whether a single three-phase transformer, or three single-phase transformers connected as three phase transformer bank. It is, to a three-phase transformer what additive/subtractive polarities are to a single-phase transformer.Angular displacement is one of a number of conditions that must be the same before two three-phase transformers (or transformer banks) are paralleled.'Angular displacement' is the angle by which the secondary line-to-line voltage lags the primary line-to-line voltage.Angular displacements for common connections are as follows:delta/delta transformers have an angular displacement of 0o or 180owye/wye transformers have an angular displacement of 0o or 180odelta/wye transformers have an angular displacement of 30o or 210owye/delta transformers have an angular displacement of 30o or 210oSo, for example, it is impossible to parallel a delta/delta or wye/wye transformer with a delta/wye or wye/delta transformer, as their angular displacements are different.Determining the angular displacement of a particular transformer configuration (wye-delta, etc.) can be done by drawing the phasor diagram for the complete transformer as follows:draw the primary phase voltagesdraw the primary line voltagesdraw the secondary phase voltagesdraw the secondary line voltagesmeasure the (angular displacement) between a secondary line voltage and its corresponding primary line voltage
IWant to see the connection of the daigram Star and Delta connections?
Google star delta motor connections. If a motor is wired in star-delta (Yd), it starts up with lots of torque and then switches over to delta for normal "running". This is because the start-up current per phase when delta connected is much larger than star.
What are the advantages of automatic load sharing of transformers?
advantages for automatic load sharing of transformer with protective analysis
What are the advantages of 3-phase transformer over 3 single-phase banks of transformers?
The main advantage is that the 'footprint' of a three-phase transformer is smaller than a transformer bank, and all connections are prewired which makes them easier and quicker to install and replace.
Can you bank three single phase transformers in a delta to grounded wye with one transformer having a different impedance?
yes
Can you hook up a delta to delta transformer to be a delta to wye transformer?
The open Delta or V-Connection transformer is an improvement of the 1 three-phase transformer. The open Delta transformer can restore power in a Delta-Delta three-phase bank when one of the three single-phase transformers, which can be individually disconnected and replaced in case of failure, breaks down. The open Delta transformer then allows functionality to be restored, but at a reduced power of 57.7 of the original power.
What is star and delta in electrics?
They are two of several standard connections for three-phase alternating current machines.
The speed of an electric motor can be controlled by?
By using the star- delta starting methodBy using variable rhoestatsBy using auto transformers
