Yes, what matters is that the cable can take the correct voltage, and is thick enough to carry the required current, but ac or dc makes no difference.
To state it simply, a DC brushless motor is not a DC motor. It is an AC motor with an inverter (or electronic commutator) on the front end to make the AC, so you can use a DC input.
A dc series motor can work on dc and ac because dc motors are totally reversible.
Ac motor have slip ring, to remove the slip ring,connected to the commutator its a dc motor.
Yes. You can "Meg" any motor, AC or DC.
It is the process of conversion of generated ac voltage into the armature of a dc generator to dc voltage at the terminal of the dc generator by use of pair of brushes and commutator. OR It is the process of conversion of given dc voltage at the terminal of the dc motor to ac voltage in the armature windings in a dc motor by use of pair of brushes and commutator.
It depends on the motor. The fan is driven by an electric motor, and it can use a dc motor (as in a car) or an ac motor (as in a house). They are not interchangeable.
To state it simply, a DC brushless motor is not a DC motor. It is an AC motor with an inverter (or electronic commutator) on the front end to make the AC, so you can use a DC input.
DC Motor works on DC source and AC motor works on AC source
use a inverter to change dc to ac or couple it to a ac motor making it a motor generator. Comment: AC motors cannot run on DC since their principle of operation based on induction. There's an exception,however, and thats for Universal Series motor which can run on either AC or DC.
A electric car uses either a DC or AC motor. Typically they use DC motors.
AC stands for alternating current, and DC is direct current. A motor is a device that uses electrical energy to spin. An AC motor uses AC voltage, and a DC motor uses DC voltage. http://ezinearticles.com/?The-Difference-Between-AC-and-DC-Electric-Motors&id=193767
A dc series motor can work on dc and ac because dc motors are totally reversible.
we can either use dc series motor or induction machine ,but dc supply is not easily available so we use induction motor ,
ac
There is no difference in the cables. The only difference is the type of electrical power being transmitted. AC or DC applications use the same wires.
if you power an ac motor with dc or a dc motor with ac you will likely start smelling smoke and the motor will be damaged. If the motor is marked "3-phase", "shaded pole", or "induction" it is an ac motor! BTW, there are ac/dc motors that will run on both, they are wound very much like dc motors but a bit differently.
Ac motor have slip ring, to remove the slip ring,connected to the commutator its a dc motor.