0
Can you use 14-2 wire to operate a ceiling fan using two switches one for the fan the other for the lights?
On these types of installations an electrician would use a three wire cable set from the switch box to the fixture's junction box. At the fixture's junction box both the fan neutral and the light neutral would be wire nutted together with the incoming neutral from the switch boxes. From the three wire, the white wire would go to the fan and light's neutral wires. The Black would come from the bottom of one of the switches and go to the fan's motor lead. The red wire would come from the bottom of the other switch and go to the light fixture's lead.
It can be done with two runs of two wire to the fixture. You will need a two gang switch box for this project to hold the two separate switches. You could use a single gang light switch box if you can still find where duplex switches being sold. A duplex switch is one that has the configuration of a duplex receptacle with the switches being one on top of the other. The cover plate is the same one used for duplex receptacles. To answer this question fully more information is needed.
See discuss in the left margin.
What else can I help you with?
How many linear ft of track lighting per 20 amp circuit?
You need to address this from the prospective of current draw per light. The length is not really the issue. Your continuous current should not exceed 80% of 20 amps, or 16 amps. Now if you were using certain halogen bulbs the current for each might be 1/2 amp each so you could have 32 such bulbs. Do a sample layout in what is called a reflected ceiling plan (Imagine the ceiling plan on the floor) and see how many lights of what current you plan to use and break up your circuit as needed.
How do you control 4 light in one switch and the same lights control by 4 switches?
You want four switches to independently turn 4 lights on and off. You need two 3-way switches, and two 4-way switches. The first 3-way is located where the power first comes into this system, two travelers (wires) go to the first 4-way switch, two travelers then go from that switch to the other 4-way switch and two wires go to the final 3 way switch. The third wire on the last 3 way switch then goes to the first light fixture. This is a complicated wiring project and it is not as simple as it sounds. Realistically, you will have more than 2 wires traveling between switches depending on whether the neutral is located, and further more dependent on whether power from the panel first comes to a switch or to a light fixture. You need to plan this well or you may have more wires in one or more boxes than code allows. Also, wires must be attached in particular positions on all the switches, or you will end up with a situation where some of the switches will work and some won't and troubleshooting is very complex.
Do you need 3-wire romex to feed bedroom ceiling box by electrical code?
No, you can feed it with a 2 wire Romex + ground. It depends on what is mounted on the ceiling. If it is just a light all you need is 2 wire + ground Romex. However if it is a fan/light and you want to control each one independant of the other you will need to use 3 wire Romex + ground. This is of course if you have 2 seperate switches. You would then connect the red wire to the blue light wire and the black wire to the black fan wire. If you use 2 wire Romex just connect the blue and black fan/light wire to the black wire in the ceiling box.
What happen to lamp if over voltage?
A lamp will only operate at its rated power if it is subjected to its rated voltage. Increase that voltage will increase the power of the lamp -in other words, it will operate more brightly. This is how 'photoflood' lamps operate -they are deliberately designed to operate at overvoltage. Of course, this reduces the life of the lamp.
How far apart do you put outdoor pathway lights?
It depends on the lights you use. You want the light to slightly overlap the other lamps.
How can I remotely operate my lights using wifi controlled light switches?
To remotely operate your lights using wifi controlled light switches, you need to first install the wifi controlled light switches in your home. Then, connect the switches to your home wifi network using the manufacturer's app. Once connected, you can use the app on your smartphone or other devices to turn the lights on or off from anywhere with an internet connection.
Are light switches required on all lights or are pull strings allowed?
A pull-string or pull-chain switch IS a light switch. Some other types of light switches are called wall switches and cord switches.For more information see the answers to the Related questions shown below.
What is the difference between flush and semi-flush mounted ceiling lights?
The difference between flush and semi-flush mounted ceiling lights is that one of them can be mounted on the ceiling and the other one can be mounted elsewhere.
What is the importance of time switches aside from turning on lights or radios and other appliances?
The importance are ...................................................................................................
How can I wire a ceiling fan with 2 switches to control the fan and light separately?
To wire a ceiling fan with 2 switches to control the fan and light separately, you will need to connect the fan and light to separate switches. One switch will control the fan, while the other switch will control the light. Make sure to follow the wiring instructions provided with the ceiling fan and consult a professional electrician if needed.
Where would you find series circuits?
-- Older/cheap Christmas lights.-- Switches for lights and other household appliances, but not the household outlets.
How does a wireless 3-way switch operate in a home automation system?
A wireless 3-way switch in a home automation system operates by using radio frequency signals to communicate with other switches and a central control hub. This allows the switch to turn lights on or off from multiple locations without the need for physical wiring between the switches.
How can I properly wire a ceiling fan with two switches?
To properly wire a ceiling fan with two switches, you will need to connect the fan's hot wire to one switch and the light's hot wire to the other switch. Make sure to follow the manufacturer's instructions and turn off the power before starting the installation.
electrical outlet installation?
form_title=electrical outlet installation form_header=9423 Which services are you in need of? (Choose all that apply)*= [] "Repair or replace an old switch, fixture or outlet [] Install new switches, fixtures or outlets [] Troubleshoot an electrical problem [] Move switches, fixtures or outlets" Please describe the electrical fixtures that are included in this project (please select all that apply)*= [] Ceiling fan or chandelier [] Switches [] Interior lights [] Outlets [] Exterior lights [] Other fixtures [] Bath or attic exhaust fan Please describe this location.*= () Home/Residence () Business
What is the most durable ceiling fan with lights?
One of the most durable ceiling fan with lights is the Hunter Fan Company 53237 Builder Plus Ceiling Fan. It is known for its high-quality construction, reliable motor, and long-lasting performance. Other durable options include the Minka-Aire F843-DK Wave Ceiling Fan and the Casablanca Fan Company Verse Ceiling Fan.
Why do hotels typically not have ceiling lights?
Hotels typically do not have ceiling lights because they aim to create a cozy and inviting atmosphere for guests. Instead, they use a combination of lamps, sconces, and other lighting fixtures to provide a more intimate and customizable lighting experience.
Why don't hotels have ceiling lights?
Hotels typically do not have ceiling lights because they aim to create a cozy and inviting atmosphere for guests. Instead, they use a combination of lamps, sconces, and other lighting fixtures to provide a more intimate and customizable lighting experience.
