A: Photocell and LED cannot work directly because these are different devices. But yes each independently can work as a unit all you need is some buffering.
When light strikes a photocell, the resistance decreases, allowing current to flow more freely.
The neutral is needed for the internal sensing electronics inside of the photo cell switch.
There are several different types of LED lights available, each designed for specific purposes. Here are some common types: Standard LED Bulbs: These are the most common type of LED lights used for general lighting purposes in homes, offices, and commercial spaces. They come in various shapes and sizes to fit standard light fixtures. LED Tubes: LED tube lights are designed to replace traditional fluorescent tube lights. They offer energy savings and longer lifespans compared to fluorescent tubes. LED Strips: Also known as LED tape lights or ribbon lights, LED strips consist of small LED chips mounted on a flexible circuit board. They are versatile and commonly used for accent lighting, under-cabinet lighting, and decorative purposes. LED Spotlights and Floodlights: LED spotlights and floodlights provide focused illumination and are commonly used for outdoor lighting, security lighting, and highlighting architectural features. LED Panel Lights: LED panel lights are thin, flat lighting fixtures that provide uniform illumination. They are often used in offices, schools, hospitals, and commercial buildings as a replacement for traditional fluorescent troffer lights. LED Downlights: LED downlights, also known as recessed lights or can lights, are installed into the ceiling to provide directional lighting. They are popular for both residential and commercial applications. LED High Bays and Low Bays: These are powerful LED fixtures designed for high-ceiling environments such as warehouses, factories, gymnasiums, and retail spaces. LED Street Lights: LED street lights offer energy efficiency and long lifespans for outdoor lighting applications, including street lighting, parking lots, and pathways. LED Grow Lights: LED grow lights are specifically designed to support plant growth indoors. They provide the necessary spectrum of light for photosynthesis and are commonly used in indoor gardening, hydroponics, and commercial greenhouse operations. Smart LED Lights: These are LED lights that can be controlled remotely via smartphones, tablets, or smart home systems. They often come with features such as dimming, color-changing capabilities, and scheduling options for customizable lighting experiences. this information is provided by: world smart led
Home Depot
It is simple LEDS do need a definite voltage drop to work must have a minimum current to operate. for a 9v battery source and a LED of 3.2v operating at 20ma the solution will be 9v-3.2=5.8v therefore to limit the current to 20ma a resistor of 5.8v/0.02=290 ohms not such an animal so a 270-300 ohms will work. Final note make sure that the LED power is not exceeded 3.2v x0.02ma=63 mw
Yes, LED light bulbs can be used with photocells, which are devices that automatically turn lights on or off based on ambient light levels. However, it's important to ensure that the photocell is compatible with LED technology, as some older photocells may not work effectively with LED bulbs. Additionally, using LED bulbs with a compatible photocell can enhance energy efficiency and extend the lifespan of the lighting system. Always check the manufacturer's specifications for both the bulbs and the photocell for optimal performance.
LED floodlights are simply LEDs with a de-focusing lens, allowing the light to be spread out, although dimmer than if it had a focusing lens to concentrate the light into a tighter beam. Most of the time, LED floodlights are used to light up the side of a building, or a somewhat large area of land (7x7' perhaps), although keep in mind they can only shine so far before you probably are going to spend more money than you should on LED lighting, and should go for an Arc lamp.
it creates a dc current
You need two devices, a light source, such as an LED, and a photocell such as a selenium cell or cadmium sulfide cell. The output of the photocell can be amplified and connected to a switch which controls an audio oscillator to sound when the light of the LED, received by the photo cell is broken.
To install floodlights in your outdoor space, follow these steps: Choose the right location for the floodlights. Purchase the appropriate floodlights and necessary installation materials. Turn off the power to the area where you will be installing the floodlights. Mount the floodlights securely to the desired location. Connect the wiring according to the manufacturer's instructions. Test the floodlights to ensure they are working properly. Adjust the angle and direction of the floodlights as needed for optimal lighting.
By covering the photo cell and if the relay coil doesnt work.
A photocell in a kerosene heater works by using light to generate an electrical current. The photocell detects the flame produced by the heater and triggers the fuel pump to continue supplying kerosene. If the flame goes out, the photocell senses the absence of light and shuts off the fuel supply to prevent dangerous fuel leaks or build-up.
Photocells are designed to work at night when it gets dark and turn off in the morning when it gets lighter. If the photocell is on during the day then it is not working the way it was designed to. Time to get a new one.
By covering the photo cell and if the relay coil doesn't work.
I understand your trouble, we really need the inexpensive consumer product, but we often get what we pay, those cost-effective are relatively expensive. I am an environmental enthusiast and accustomed to using LED tubes in bedroom and the garage,as well as LED downlight in hall and outdoor LED flood lighting in courtyard, LED lighting can really save significantly large amount of electricity and maintenance costs, and more importantly bright and soft, With the help of my friend engaged in lighting design, I chosen a medium-sized manufacturer specializing in high power LED floodlights and other outdoor and indoor LED lighting , which with reasonable prices and various styles and excellent characteristics of waterproof and dustproof and heat dissipation have been praised by lighting designers and dealers and users, you can visit their PIR LED floodlights of their web named Lisida lighting to learn more features about PIR LED floodlights.
The best outdoor lights for enhancing a house's appearance and security are LED floodlights and motion sensor lights. LED floodlights provide bright and energy-efficient illumination, while motion sensor lights detect movement and can deter intruders. These lights can be strategically placed around the house to improve visibility and safety at night.
Led floodlights which stands for light emitting diode are energy alternative lights to the regular incandescent light bulbs. They release less energy and much more efficient in lighting as well as time.