0
in wire cut, a wire is passed through a metal or is placed next to it. the wire works as one of the electrodes while the work piece would be the other one; using andielectric liquid to isolate the wire from the work piece. the electricity is conducted in the wire. as the wire gets closer to the work piece the electricity (electrons) tend to jump from the wire to the work piece in order to create a complete electrical circuit that's when a spark is formed. the dielectric helps us by isolating the wire from the work piece as long as it can, so we can have enough difference in potential between two electrodes before the spark is formed, it works like capacitor stopping the current from going through it until it collapses at a potential and enough current passes through at once. A collateral effect of this passage of current is that material is removed from both the electrodes.
What else can I help you with?
How can you cut an energized conductor?
With an insulated handle wire cutter.
Which electrical wire to cut black or white?
Black is hot and white is neutral. If you are switching something you switch the black, so that is what you would cut.
Can a cut Grounding wire will starts a fire?
No. Get is connected as soon as possible for safety's sake.
The common mistakes of wiring a 3 pin plug?
-wire can be taken straight to the pin and not positioned in plastic 'valley' (usually mistake made in earth wire) -wire cut when outer cable is removed -cable grip clamped onto three wires instead of cable -loose copper wires visible.
Can a cut electrical wire cause a fire?
If the exposed wire grounds out and a great amount of heat is produced then yes a fire could start under this condition. Remember overhead transmission wires are exposed wires but are well insulated from ground so as not to have the above scenario happen.
How does a wire EDM use an electric current to cut metals?
EDM works by creating thousands of sparks. The sparks melt or vaporize the material instead of cutting it. This process works best on non-ferrous metals, such as steel.
What is die sinking EDM?
an edm is a electrode discharge machine. it uses electicity through an electrode to precision cut metal submerged in oil.
What is wire die fabrication?
I can think of two different things this might be: 1. Dies can be used to make wire. The wire is pulled through a smaller hole to make a thinner wire. The tool with the small hole would be a die. 2. You might be referring to wire EDM (Electrical Discharge Machining). This is a way of cutting metal with electricity. It is often used in the fabrication of dies because it can cut through the hardest metal - metal that is too hard to cut with normal cutting tools.
What is insulated wire stripped on?
Insulated wire is typically stripped using a wire stripper tool, which has adjustable blades to cut through the insulation without damaging the underlying wire. Alternatively, wire can also be stripped using a utility knife, scissors, or a dedicated wire stripping machine.
When was Cut the Wire created?
Cut the Wire was created in 1987.
Should you cut the red wire or the blue wire?
You Should Cut The Yellow Wire! : D
Can you cut yelow wire 2001 Malibu?
you can cut any wire you choose to cut. i, however, would not cut it.
What is the best tool to cut wire efficiently?
The best tool to cut wire efficiently is a pair of wire cutters.
What kind of simple machine is a pair of wire cutters?
A pair of wire cutters is a type of lever simple machine. The handles act as the effort arm, the pivot point is the fulcrum, and the cutting blades act as the load arm to provide the force needed to cut through wires.
How do you cut clay with cheese wire?
You cut carefully so that the wire does not touch the middle of the clay.
How do you do you cut the wire in the freezer?
With a pair of wire snips.
What machinestools are used in metal technology?
Machine tool is a term used to describe a variety of metal cutting and forming machines. Some of those machines are as follows, lathes (cut metal by "turning"), milling machines, brake press and shear, drill press, EDM, water cutting machines.
