Power is voltage times current.
answer is actually voltage
The power dissipated across a resistor, or any device for that matter, is watts, or voltage times current. If you don't know one of voltage or current, you can calculate it from Ohm's law: voltage equals resistance times current. So; if you know voltage and current, power is voltage times current; if you know voltage and resistance, watts is voltage squared divided by resistance; and if you know current and resistance, watts is current squared times resistance.
Power = Current * Voltage * Power FactorAbove expression can further be explore as :1. For DC CircuitsPower = Current * Voltage2. For Single Phase AC CircuitPower = Current * Voltage * Power Factor3. For Three Phase AC CircuitPower = Line Current * Line Voltage * Power Factor
Power factor measures the phase difference between voltage and current. If they are in phase the Power Factor is one. If the current and voltage are out of phase the power factor is between zero and one. You can describe the PF by saying the current lags the voltage with a PF = .8 or the voltage leads the current with a .8 PF.
Wattage or power rating of a product can be calculated by multiplying voltage rating and current rating. (Power = Voltage x Current). e.g. if device is working at 12V and 2A is the current rating. It is 24Watt. Since Voltage = Current x Resistance , for a resistive load power can also be calculated by Power = Current x Current x Resistance = I^2 x R = I square R
I'm not sure there is a term other than "power"; V*A, or the vector sum of real and reactive power is equivalent to the power calculated by multiplying the voltage times the current, ignoring phase shift.AnswerThe product of voltage and current in an a.c. circuit is called 'apparent power', expressed in volt amperes, in order to distinguish it from 'true power' (in watts) and 'reactive power' (in reactive volt amperes).
Power = (current) times (voltage)Current = (Power) divided by (voltage)Voltage = (Power) divided by (current)
I would say both. Power (energy, or work, per unit time) can be calculated with the formula: P = IV (power = current x voltage)
The unit of power is watts, the unit of current is amps, and the unit of voltage it volts. Power = Voltage X Current Voltage = Power / Current Current = Power / Voltage In electricity, power is symbolized with a P, current with an I, and voltage with a V. The real formula looks like: P = V x I V = P / I I = P / V
You do not need ohm's law to relate power to current and voltage. Power is current times voltage. If you know current and voltage, you do not need to know resistance.
Voltage x current = power (watts)
You get power, which is voltage * current (so both!).
P = I^2 R = IV = v^2 / R , Where P is power, I is current, R is resistance, and V is voltage. Given voltage and current, power = current * voltage, or P = IV.
in ac circuits power,P=VICOS@ @ is the angle between voltage and current. in dc P=VI V is the voltage I is the current. Power (in Watts) is current (A) x voltage (V)
If the resistance is 1.2k and the current is 0.024 ma, then the voltage is 0.0288 volts. (Voltage = resistance times current) If the voltage is 0.0288V and the current is 0.024 ma, then the power is 0.6912 microwatts. (Power = voltage times current)
While there is a voltage, a current will flow - assuming there is a conducting path. The amount of the current can be calculated by Ohm's Law. That is, you divide voltage by resistance.