0
What else can I help you with?
What is self control of synchronous motor drive?
the self control of a synchronous motor is done using an inverter fed through a dc link.speed is controlled by varying the output frequency of the inverter by controlling the dc link voltage
What is synchronus capacitor?
A synchronous condenser (also known as a synchronous capacitor or synchronous compensator) is a DC-excited synchronous computer (large rotating generators) whose shaft is now not connected to any using equipment.
Causes of low power factor methods of improving power factor?
using highly inductive loads may lead to reduction in the power factor. or consumption of unappreciable amount of power also results in the same. methods to improve PF . using synchronous condensers using capacitor banks using ow inductive loads
How do you design the 3 bit binary counter using D flip flop?
Designing a 3 bit synchronous counter using jk flip flop is not an easy project for the uninformed. This is best left to professionals who are adept at programming. There are lengthy guides available on the internet if it is necessary to create one.
How much amperage does a gas clothes dryer draw?
Check the nameplate rating on the door or door frame of your washer, it should tell you the amp rating or the kw rating of the machine. If it only has the KW rating of the machine, simply divide the KW rating by the voltage of the receptacle and it'll give you the current (ampere) rating. Typically, a modern washing machine will draw approximately 7-12 amps. However, anticipate a higher amperage when starting the machine as the machine will draw 1.5X the rated current to start the machine (starting current). Regardless of the amp rating, the NFPA-70 (National Electrical Code) requiresa 20 Amp fuse or circuit breaker; and the circuit for the washing machine must be on its own, dedicated circuit.
Analysis of 6 pulse statcom in pscad?
Analysis can be done easily using PSCAD
What is an example of a sentence using the word simulate?
If I hit you. It will simulate pain receptors in your body.
How does the starting of synchronous motor using dc generator as a load work-?
Starting of the synchronous motor using the DC generator creates a magnetic field.
Is there any other method of damping the oscillation in a synchronous motor other than using damper winding and if yes what is it?
In synchronous motor hunting can be minimized using flywheel to the shaft .
Why was Philip Emeagwali important in history?
He programmed the Connection Machine to compute a world record 3.1 billion calculations per second using 65,536 processors to simulate oil reservoirs.
How does the receiver sync up in synchronous transmission?
using chuck norris' beard and awesomness
How do you spell onimonotopia?
The correct spelling is onomatopoeia, using words that simulate natural sounds.
What is the synchronous speed of a four-pole motor connected to 50Hz?
The synchronous speed of a motor can be calculated using the formula: ( \text{Synchronous Speed} (N_s) = \frac{120 \times f}{P} ), where ( f ) is the frequency in hertz and ( P ) is the number of poles. For a four-pole motor connected to a 50Hz supply, the synchronous speed is ( N_s = \frac{120 \times 50}{4} = 1500 ) RPM. Thus, the synchronous speed of the motor is 1500 revolutions per minute.
Short note on parity generator and checker?
devices and simulate the circuit using the VHDL codes.
What is asynchronous and self synchronous demodulation?
Synchronous demodulation is done using the same modulating signals such as cos(2000t) that was used in the transmitter. It still has to use Band-Pass (if multiple signals are present) and Low-Pass filter
What is self control of synchronous motor drive?
the self control of a synchronous motor is done using an inverter fed through a dc link.speed is controlled by varying the output frequency of the inverter by controlling the dc link voltage
What is synchronus capacitor?
A synchronous condenser (also known as a synchronous capacitor or synchronous compensator) is a DC-excited synchronous computer (large rotating generators) whose shaft is now not connected to any using equipment.
