0
What else can I help you with?
What does a modulator-demodulator stand for?
Modulator-Demodulator stands for modem
Am demodulator diode detector circuit pdf?
diode detector for am demodulation
What are the types of FM demodulator?
Most common nowadays is the quadrature detector. PLL detectors are still common too.
Why you use 455kHz frequency as an intermediate frequency in communication?
The intermediate frequency in the superheterodyne receiver is chosen as the desired compromise between sensitivity and selectivity. 455kHz is used in AM broadcast applications, while 10.7mHz is used for FM. The IF stage is tuned for a steep skirt passband at that frequency, allowing only the desired heterodyned (shifted) input signal to make it through to the demodulator.
What is difference between modulator and demodulator?
Modulation is used when information is available in analog form that varies the frequency and/or amplitude of a lower frequency wave, depending on the information it carries. The role of modulation is to place this information onto a carrier frequency that can be transmitted more readily and with least loss of information. There are three fundamental types of modulation - frequency modulation, amplitude modulation and phase modulation. In each of these, a carrier frequency is modulated by a lower frequency, to form a modulated carrier wave. A modulator modulates the carrier frequency, while a demodulator detects the modulation on the carrier wave and recovers the original lower frequency waveform at the destination. For many years the modulated carrier wave was converted to a radio signal. Now it is often an electrical signal which is sent down a teleohone line; the information is usually a set of pulses going between computers. When computers are connected to each other in a two-way conversation, the MOdulator and DEModulator are combined into a single device called a MODEM.
What is the more common abbreviation for a modulator-demodulator?
demodulator
How radio works step by step?
Exciter Power amplifier Input filter/amplifier Demodulator Audio processor
What two words were combined to make up the modem?
modem (modulator + demodulator)
What does a modulator-demodulator stand for?
Modulator-Demodulator stands for modem
What modem does?
Modulator/Demodulator
Am demodulator diode detector circuit?
demodulator circuit is a circuit which is used for remove all high frequency components from modulated signal.
What are the fetures of modem?
Modulator and Demodulator
What is the full meaning of the abbreviation modem?
Modem = modulator-demodulator, and is a tool for tweaking an analog signal so that it can be used in a digital device.
What is the full meaning of moderm?
modulator demodulator
What is MODEM short for?
MODEM stands for 'Modulator-Demodulator'.
What is a demodulator?
The process of separating the original information or SIGNAL from the MODULATED CARRIER. In the case of AMPLITUDE or FREQUENCY MODULATION it involves a device, called a demodulator or detector, which produces a signal corresponding to the instantaneous changes in amplitude or frequency, respectively. This signal corresponds to the original modulating signal
How do you calculate average error vector?
The error vector magnitude is measured by an specialized equipment that closely resembles a demodulator. The receiving points of the demodulator calculates the distance the points are from the ideal location.
