Most common nowadays is the quadrature detector. PLL detectors are still common too.
Modulator-Demodulator stands for modem
a demodulator sole function is to restore the original modulating signal. it works by removing the Carrier
diode detector for am demodulation
There are two types of modulations. They are amplitude modulation and frequency modulation. In AM, amplitude of the signal is modified. In FM, frequency is getting modulated. Frequency modulated with carrier waves are transmitted and received by receivers without any distortion.
The intermediate frequency in the superheterodyne receiver is chosen as the desired compromise between sensitivity and selectivity. 455kHz is used in AM broadcast applications, while 10.7mHz is used for FM. The IF stage is tuned for a steep skirt passband at that frequency, allowing only the desired heterodyned (shifted) input signal to make it through to the demodulator.
A demoodulator is a radio tuner and the modulator is the fm transmitters so it is the fm transmitters going to the radio
Just like a diode demodulator extracts audio from the last IF stage in an AM radio, a Foster Seely or similar discriminator circuit extracts or demodulates audio from the last IF stage in a FM radio.
demodulator
The process of separating the original information or SIGNAL from the MODULATED CARRIER. In the case of AMPLITUDE or FREQUENCY MODULATION it involves a device, called a demodulator or detector, which produces a signal corresponding to the instantaneous changes in amplitude or frequency, respectively. This signal corresponds to the original modulating signal
modem (modulator + demodulator)
Modulator-Demodulator stands for modem
there are two types:- 1) simple diode detector 2) practical diode detector the diode is common device used in am demodulator. signal(am demodulator signal ) is applied anode and output is taken from cathod
AM and FM.
AM and FM AM=Amplitude Modulation FM=Frequency Modulation Hope this helps
a demodulator sole function is to restore the original modulating signal. it works by removing the Carrier
Modulator/Demodulator
Modulator and Demodulator