There are zero watts in 220 volts. Watts are the product of amps x volts. To receive an answer, the amperage of the device has to be stated. This amperage multiplied by the stated voltage will give you the wattage of a device.
To convert Watts (W) to a horsepower rating (HP) simply multiply the Watts by 0.00134 W x 0.00134 = HP
DC 12V power supply can convert 110/220V AC power source to 12V DC.
110 v 5.5 amps is 605 watts. If it is transformed, the power in watts stays the same (in principle), so the 220 system would run at 2.75 amps.
Watts are used to measure power, whereas volts are used to measure potential difference. These are two different quantities, and you cannot convert one into another any more than you can convert kilometres to kilograms.
To determine the number of volts in a circuit with 4500 watts, you need to know the current flowing through the circuit. The relationship between power (in watts), current (in amperes), and voltage (in volts) is given by the formula P = V x I, where P is power, V is voltage, and I is current. Without knowing the current, it is not possible to directly convert watts to volts.
1 horsepower = 746 watts, 1 watt = 1 volt x 1 amp => 20 Horsepower = 14,920 watts => 14,920 watts / 220 volts = 67.82 amps
For the same power - Watts - you need to run twice as many amps at 220V than at 440V. For the same load, it'll pull half the amps at 220V than it did on 440V
you can't
Power is current times voltage, so a current of 0.5 amperes and a voltage of 220v across a bulb will yield a power of 110 watts.
NAVEED45
It the unit is watts, megawatts is millions of watts, so to convert watts to megawatts, multiply the number of watts be 1,000,000.
of course. go to the market and buy a transformer. It will convert a 110V supply to a 220V supply.
The light bulb should still have the same limit - 100 watts, because the limit is set practically by how much heat they produce. You need to make sure the wiring in the chandelier is correctly insulated for the higher voltage.
To convert calories to watts, you can use the formula: 1 calorie is equal to 0.001163 watts. Simply multiply the number of calories by 0.001163 to get the equivalent in watts.
yes, but you need a transformer to convert it,
To convert 110v to 220v using a step-up transformer, connect the 110v input to the primary winding and the 220v output to the secondary winding of the transformer. The transformer will increase the voltage while maintaining the power output.
kW x 1,000 = watts