1 horsepower = 746 watts, 1 watt = 1 volt x 1 amp => 20 Horsepower = 14,920 watts => 14,920 watts / 220 volts = 67.82 amps
17amps
Opera (loudly sung notes with no mic/amps) : Tenor Rock and others : Baritone
To convert minims to milligrams, you need to know that 1 minim is approximately equal to 0.06161 milliliters. Since the density of water is about 1 mg per milliliter, you can convert minims to milligrams by multiplying the number of minims by 61.61. For example, to convert 10 minims to milligrams, you would calculate 10 × 61.61, resulting in approximately 616.1 mg.
Not generally no. There would be no point. The easiest is to convert the standard yellow video out to coax with an RF modulator
Most people remember the days of pre amps, tuners, and amps. A receiver is just all of that stuff combined into one big box. Now most of the receivers these days have added video switching to the mix also. so you can take the audio and video from the cable box and DVD player into the receiver then have just one video cable up to the tv.
For the same power - Watts - you need to run twice as many amps at 220V than at 440V. For the same load, it'll pull half the amps at 220V than it did on 440V
Volts cannot be converted to amps. If you mean convert 220v to 12 volts output, then you need a 220v to 12 v step down transformer with the VA or watt rating you require.
you can't
That load would be 10.9 amps.
The maximum current capacity of a 220V 20 amp outlet is 20 amps.
three phase full load 1000/(1.732*220)*24 = 62.98amps
45-50 amps. But your overcurrent protection and wire must be designed for 125% of load so the max overcurrent protection is 55 amps or 60
50 Amps Single Phase 20 Amps Three Phase
NAVEED45
4.3 amps
The formula you are looking for is I = W/E.
To convert VA to amps, you can use the formula Amps = VA / Volts. In this case, Amps = 140 VA / 240 V = 0.5833 Amps.