answersLogoWhite

0

start generator, plug in variable speed drill, set drill to forward, squeeze trigger, quickly spin drill in reverse by hand. be sure generator main breaker is on.

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

How do i Field flash a portable generator?

To field flash a portable generator, first disconnect the generator from any power source and remove the cover to access the rotor. Use a battery or a DC power source to apply voltage to the rotor's terminals, ensuring correct polarity; this will help restore the magnetic field. Typically, you can connect a 12V battery to the rotor for a few seconds, then reconnect everything and start the generator to see if it generates power. Always consult the manufacturer's manual for specific instructions and safety precautions.


What is a flash designer?

Flash Designer is kind of webmasters who using "flash animation generator programs" as same as Adobe Flash, Dreamweaver.


What are the differences of Long shunt vs short shunt generator?

In long shunt the shunt field winding is in parallel to both generator and series field. In short shunt the shunt field is in parallel to generator only.


How do you polarize Harley Davidson generator?

flash the armature or "A" post of the generator to the positive terminal of the battery using a peice of wire.


Why should the generator field rheostat be kept to its maximum at starting?

Keeping the generator field rheostat at its maximum at starting helps to establish a strong magnetic field in the generator, which is essential for generating sufficient voltage to initiate the generation process. This ensures a smooth and stable startup of the generator.


Answering Which one is a separately excited generator - ac generator or dc generator?

Excitation is the phenomenon by which you control the excitation of field winding of a generator. In DC generator field winding is placed on stator and this field winding can be self excited or seperately excited depending upon the type on generator used. AC generators can also be self excited or seperately excited type but field winding is placed on rotor nad armature winding on stator.


Is the critical resistance of shunt field less or more than the field resistance of generator?

More due to the impedance levels in the generator


What is a shunt generator?

A shunt generator is a method of generating electricity in which field winding and armature winding are connected in parallel, and in which the armature supplies both the load current and the field current.A direct current (DC) generator, not using a permanent magnet, requires a DC field current. The field may be separately excited by a source of DC, or may be connected to the armature of the generator so that the generator also provides the energy required for the field current.


What is meant by flashing a field in excitation?

A generator needs to have residual magnetism in its field coils to start the generation of electricity. A generator that has not been run in a long time will loose this magnetism. Because the field voltage is a DC supply, a battery across the field wiring will energize the coils instantaneously. Doing this several times will cause sparking when the contact to the battery is broken, hence the flash. This intermittent energizing and de-energizing will bring the residual magnetism back into the field coils. When the generator is started, the voltage output should rise to its normal level. If it does the magnetizing of the field coils to bring back the residual magnetism will have worked.


What is field winding?

The field winding on a generator is the winding that is electrified to create an electromagnet; it is generally the winding found on the rotor (the rotating part of the generator).


How do you full field a ford tractor generator?

while the engine is running , put your + lead from your voltmeter on the armature lug( the big lead). take off your field wire from the generator (don't add power to the lead from the regulator or you will fry the regulator) add a power source to the field lug of the generator. the generator should start climbing, if you get 14.5 volts , the generator is good


What is critical resistance of the field circuit of a DC generator?

The value of resistance of shunt field winding beyond which the shunt generator fails to build up its voltage is known as " critical resistance at a given speed it is the maximum field resistance with which the shunt generator excite.