0
What else can I help you with?
How one can insert a 2 terminal plug in a three pin socket?
as long as the pins are the same on the plug to socket you just push it in, when a plug has only 2 pins it is double insulated look for 2 squares one inside the other this is the symbol ;double insulated means no metal in casing on the appliance
What is the function of a 13 A Switch Socket Outlet?
It enables you to switch off the load from the socket, rather than have to pull the plug out of the socket.
Why is a cracked plug socket can cause a potential fire hazard?
The cracked plug can cause the wires to spark and cause a fire. When the wires are plugged into it where the crack is the wires can touch the socket and cause the fire.
When removing an electrical plug from its socket grasp the electrical cord?
Do not remove any electrical plug by grabbing the wire. This weakens the connection at the plug. ALWAYS grab the plug itself when removing it.
When does electricity become dangerous to people?
when you put your penis in a plug socket for pleasure
What does a three phase motor look like?
A three-phase motor typically has three sets of windings arranged 120 degrees apart around the stator core. It is larger and more robust compared to single-phase motors, with a more complex wiring configuration. The motor may have six leads coming out of it, instead of just two like in single-phase motors.
How do you jump over the fan on poptropica?
Jump onto the plug/socket and then jump onto the back of the fan and then jump over the fan blade.
Your spark plug socket will not fit onto the spark plug on the 5 cyllinder on your 1994 Chrysler 3.5 liter engine Is there a special tool needed to remove this plug?
no, it takes the same socket as the others. most likely something is down in the hole next to the spark plug
Can you convert a garage light socket to accept a three prong shop light plug in?
If you want to you could remove the light socket and put in an outlet then plug your light into the outlet.
Why there are three cut- marks in three pin plug?
The little slit in the pins makes it flexible when it is inserted in the socket. It helps to make a good contact adjust itself in the socket.
Can you plug a 2 phase welder on a 3 phase plug?
No. Three phase service is something that you would need to request from your power company. You'd need to not only have service, you also need to have an electrician run 3 phase service into your home.
You broke a plug trying to remove it what is the best way to get it out?
Usually if you break a plug it is only the top white ceramic part. The only time this would be a problem is if your plugs are in the top of the head and down in a hole. They do make needle nose pliers long enough to reach down and get the plug. The ceramic part should have come out with the socket if using a regular spark plug socket. That would leave just the base. Take the socket and put a piece of tape on the inside of the socket on each face. Bring it out over the edge of the socket and onto the outside. This will make the socket enough smaller that it should hold on to the base of the spark plug so you can get it out.
How can I replace a lamp socket?
To replace a lamp socket, first unplug the lamp. Remove the old socket by unscrewing it from the lamp base. Disconnect the wires attached to the old socket and connect them to the new socket following the manufacturer's instructions. Screw the new socket onto the lamp base and plug the lamp back in to test it.
What is the common way of referring to a plug and its corresponding socket as per the electrical engineering terminology?
Plug and socket, plug and socket outlet, plug and receptacle or plain plug and outlet all seem to be in common usage in the US. Plug and socket is possibly the only wording commonly used in the UK. [Plug and socket outlet sounds ok to a me, as a Brit, but we never really use that expression in the UK. Plug and outlet or plug and receptacle actually sound very strange!]
What size spark plug socket for 650 v-star?
18 mm spark plug socket
How do you remove the middle driver's side spark plug on 98 blazer?
Remove the wheel, tape up or remove the innerfender-well flap, use a 5/8 spark plug socket, slide it up onto the plug and use a 3/4 wrench on the end of the socket ( I used a ratcheting wrench, they fit in the space nicely). Remove the plug, lube the rubber inside the plug socket for easy removal. The easiest way to install the plug is to put a piece of tubing on the end, lube the threads of the plug and use the tube to spin the plug in. Then use the socket and wrench to tighten. It took me 2 hours today to change mine and this is how I was able to get it done.
What is the purpose of 5 Pins plug in wall industrial socket?
Different pin configurations define different configurations of voltage and amperage. Your receptacle could be a three phase four wire grounding receptacle. To see more go to related linksbelow.
