A 1-ton AC can melt a ton of ice in 24 hours. The power needed is theoretically 3517 Watts so allowing for power factor and efficiency you would need a 7 kVA generator.
To answer this question the voltage of the generator must be given.
10 AC
35 KVA generator using for load 100 meter length which cable need to used
KVA = Root 3 VII = KVA *1000 / 1.73 * 415I = 500000 / 717I = 697 ApproxAnswerIt depends on the rated voltage of the generator.
It depends totally on the voltage used.
635kva
The formula you are looking for is , A = kva x 1000/Volts.
The oil perisher for 1500 KVA generator is used for the lubrication purposes.
The voltage of the generator needs to be stated to give an answer.
The Perkins 100 KVA generator uses approximately 23.8 Liters per hour. The Perkins KVA generator can be purchased at any Perkins licensed dealer.
To answer this question the voltage of the generator must be given.
How much KVA generator is required to run two AC of 1.5 tone
10 AC
MGS1500HV is the oil pressure for a 1500KVA generator.
No, the generator is too small.
The operating temperature for a 1500 kVA diesel generator can vary depending on the specific model and manufacturer. It is important to check the manufacturer's specifications for the specific generator model to confirm its exact operating temperature range.
62.5 amps