0
What else can I help you with?
What is the excitation system in a generator used for?
The excitation system is used to control the excitation of the rotating field in the armature. By increasing the armature current, it in turn increases the magnetic flux in the armature coil. This has the effect of increasing the voltage output of the generator. By lowering the armature current this in turn lowers the generator output voltage. The generator's voltage regulator automatically adjusts the output voltage continuously as the applied load on the generator changes.
What is governor function in the generator?
The governor controls the speed of the power source rotating the generator. This has to be continually adjusted to match the load on the generator. As more load is switched on, the generator becomes harder to turn, this would cause the generator to slow down, unless the power unit is adjusted to increase power and correct the speed.
How do you turn a 3 phase motor in to a generator?
We can convert a 3 phase ac motor into generator by changing phase sequence of the ac input cable of that motor
What size generator do you need to move a 30 hp electric motor?
A 5 kW generator would turn it over but if the full 30 hp of mechanical power is needed, that would require about 30 kW of electric power from the generator.
What machine turns a generator to make electricity?
Anything, including a person or a machine, that can turn a generator will cause the generator to make electricity. Most commonly generators are turned by water turbines, wind turbines, gasoline or petrol engines, diesel engines or steam engines.
How you turn off the ghost generator in club penguin?
take the item off
How many ways are there to turn a generator?
There are typically two ways to turn a generator: manually by hand or through an external power source such as an engine or motor, which in turn spins the generator shaft to produce electricity.
What device is a wheel composed of a series of blades used to turn a generator?
A turbine is a device with blades that turn a generator.
What forces will turn a turbine of a generator?
Steam, water, or wind can apply force to turn the turbine of a generator. The turbine converts the kinetic energy from these sources into mechanical energy, which in turn drives the generator to produce electricity.
How many watts can be powered by a 9 volt generator?
There is no way to answer without knowing the wattage rating of the 9 volt generator. A generator's wattage rating depends on the size of the wire in it, the wattage of the rectifiers if it is a DC generator, and the horse power of the engine or motor that is available to turn the generator.
What is A device with blades that turns generator?
A turbine is a device with blades that turn a generator.
Most electric plants use what to turn a generator?
Most electric plants use steam to turn a turbine which then turns a generator.
How do you convert a DC generator to ac alternator?
Turn the DC generator inside out and you have an alternator .
How to turn a generator to standby?
When turning a generator to a standby operations mode, there is often a switch on the generator. By turning the switch on and off, you should be able to use the generator should the power turn off and resume electricity which may have been interrupted
Wheel composed of a series of blades that is used to turn a generator?
A wheel composed of a series of blades that is used to turn a generator is known as a turbine.
What energy uses kinetic energy of the air to turn a generator?
A wind turbine uses kinetic energy of the air to turn a generator. The wind pushes the blades of the turbine, causing them to rotate, which in turn spins the generator to produce electricity.
Does a wind turbine turn the generator?
yes
