if it's volt per ohm a ma would be 0.000001 of volt per ma
that is incorrect .000001 is a micro-amp not ma. besides you need two units to solve it Basically it is a ratio 1:1:1 1Ohm 1Volta 1Ampere NAMED AFTER THE DISCOVERY GUYS
that would be 1000. milli means one thousandth of the base unit (volt) millimeter is one thousandth of a meter. milliliter is one thousandth of a liter. milligram is one thousandth of a gram
The work to be done to bring a unit positive charge from infinity to a point in an electric field exists which is having a magnitude unity and direction opposite to the movement of the unit charge.
It does not work that way.I volt is 1 volt1 volt DC =1.4 voltsAC at a continuous rate of delivering energy.AnswerUnless otherwise stated, alternating currents are alwaysexpressed as root-mean-square (rms) values. So, 1 A (AC) is an rms value (which is 0.707 times its amplitude or peak value).By definition, 1 A (AC) will do exactly the same amount of work as 1 A (DC). In other words, 1 A (AC) is exactly equivalent to 1 A (DC)Since current is proportional to voltage (Ohm's Law), this means that 1 V (AC) is exactly equivalent to 1 V (DC).
That's like asking how many meters in a liter. Ampere and Volt are two DIFFERENT measurements. Ampere is how much electricity you are using, while volts are how much pressure the electricity is under(Think water). If you want to figure out how many amperes your appliance is using you could use this formula: P=UxI (Watt=Volt x Ampere) or U=RxI(Volt=Resistance x Ampere).
AnswerThe pressure that pushes the currentAnswer from University Physics Ed 11Voltage is the potential Vab of a with respect to b, which equals the work done by the electric force when a unit charge moves from a to b.1 Volt = 1 joule/column b
IT IS 1/1000 OF A VOLT. 1000 MV EQUALS ONE VOLT.
0.11 amps is equivalent to 110 milliamps (mA). This is because 1 amp is equal to 1000 milliamps.
To convert amps to milliamps, you multiply by 1,000, since 1 ampere (A) is equal to 1,000 milliamperes (mA). Therefore, 5 amps equals 5,000 milliamps.
Yes, a 5-volt 1-amp power supply can be used with a device that requires 5 volts and 500 milliamps (ma). The device will only draw the current it needs (500 ma), leaving the extra capacity of the power supply unused. However, ensure that the voltage remains stable at 5 volts to avoid damaging the device.
2.5 Amps is equal to 2500 milliamps (mA). This is because 1 Amp is equivalent to 1000 milliamps.
The answer to this question is yes. The 30 volt adapter will supply twice the voltage required by the 15 amp appliance. The other thing is that 1 amp is equal to 1000 mA. Even if the voltages were the same, the output current of 1000 mA when 1100 mA is needed, is not enough to supply the appliance.
4.5 Volts
22 mA (milliamperes) is equal to 0.022 A (amperes), as 1 A equals 1,000 mA. It can also be expressed as 22,000 µA (microamperes), since 1 mA equals 1,000 µA. In terms of voltage and resistance, if Ohm's Law is applied, the equivalent voltage would depend on the resistance in the circuit.
To convert 5 amps to milliamps, you multiply by 1,000, since 1 amp equals 1,000 milliamps. Therefore, 5 amps is equal to 5,000 milliamps (mA).
Ohms does not equal watts. You need to know what voltage is across the resistor to determine how many watts it is drawing or how many watts the resistor should be rated for.Power is the voltage across the resistor SQUARED divided by the resistance. If this 4 ohm resistor has 12 volts across it then the watts power is (12 x 12) / 4 = 36 watts.1 Watt equals 1 Volt times 1 Amp.
One horsepower (hp) equals 746 Watts (W), regardless of voltage (V). Kilo-Volt-Amps, often expressed as "KVA" is a commonly used unit of power. 1 Watt is defined as 1VA. 1 KVA equals 1000 Watts. 1 HP = 746 Watts = 0.746KVA and therefore 1KVA = 1000W = 1.34hp
There is 1 ohm in 1 volt.