The question is invalid.
Volts is a unit of electrical potential in fundamental units of joules per coulomb. Watts is a unit of (electrical) power in fundamental units of joules per second. As such, you can not determine volts from watts without knowing something else, such as amperes (coulombs per second) or ohms.
The conversion of Amps to Watts is governed by the equation Watts = Amps x Volts. For example 1 amp * 110 volts = 110 watts
You have two unknowns for this equation, 1) the voltage which you want to find, and 2) the amperage. You must know the amperage to find your answer. In household current the voltage is 110-120. However, if you use a car battery, the voltage is 12.
You could have the amperage and then use the equation above.
4 amps: 500watts = 4amps X ? volts. 500 watts/4amps = 125volts (close to household current)
42 amps: 500watts = 42amps X ?? volts. 500watts/42amps = 11.9volts prox. (close to a car battery)
1 amp: 500watts = 1amp X ??? volts. 500watts/1amp = 500volts (about like a large electric eel--300 to 800 volts)
978 watts
The formula you are looking for is I = W/E. Amps = Watts/Volts.
To determine the number of volts in a circuit with 4500 watts, you need to know the current flowing through the circuit. The relationship between power (in watts), current (in amperes), and voltage (in volts) is given by the formula P = V x I, where P is power, V is voltage, and I is current. Without knowing the current, it is not possible to directly convert watts to volts.
The formula you are looking for is I = W/E. Amps = Watts/Volts.
To convert kilovolts (kV) to watts (W), you need to know the current in amperes (A) as well. The relationship is given by the formula: Power (W) = Voltage (V) × Current (A). Therefore, without the current value, you cannot directly convert 500 kV to watts. If you have the current, you can calculate the power by multiplying 500,000 volts by the current in amperes.
The formula you are looking for is I = W/E. Amps = Watts/Volts.
To calculate the amps for a jump starter with 500 watts, you can use the formula: Amps = Watts / Volts. If assuming a standard 12-volt car battery, the calculation would be 500 watts / 12 volts = 41.67 amps.
1000 watts at 9.5AMPS in 120 volt = 4.7 AMPS in 240 volt ..........Divide that by 2 according to the choice of voltage... 500 watts (120V) + 4.7Amp
The wattage would be 500 watts. This is calculated by multiplying the amperage (5 amps) by the voltage (100 volts), resulting in 500 watts of power.
power equals current times voltage 50w=(I)110v so 50w\110v = I .454 amps
volts times amps = watts
To answer this question the voltage of the bulb is needed.
The formula you need to use is I = W/E. Use this, easier for the average person: The conversion of Amps to Watts is governed by the equation Watts = Amps x Volts. For example 1 amp * 110 volts = 110 watts 500w = 250v X A amps Therefore: 500w/250v= 2amps
The same number as 250 oranges is apples. A watt is a volt times an ampere.
500,000 watts/240 volts = 2,083.34 Amps (single phase)
To determine the number of amps a 500-watt power inverter draws, you can use the formula: Amps = Watts / Volts. Assuming a common household voltage of 120 volts, a 500-watt inverter would draw approximately 4.17 amps (500 watts / 120 volts = 4.17 amps). If the voltage is different, the amp draw will vary accordingly.
Watts and Volts are two distinct types of measurement.