0
What else can I help you with?
How many amps does a 5000-watt inverter draw from a 24 volt system?
A 5000-watt inverter on a 24 volt system draws approximately 208 amps (5000 watts / 24 volts = 208.33 amps). This calculation assumes 100% efficiency, so actual power draw may be slightly higher.
How many amps does a 2500 watt inverter use?
If we assume that the inverter is used in your car on 12 Volts DC and you are creating 120 VAC; and the 2500 watts refers to the AC side of inverter then for a resistive load Amps = Watts / Volts = 2500/120.
Can a 300 watt inverter run a 16 amp chainsaw?
One would assume the chainsaw requires 120 volts or more if you want to run it with an inverter. If your chainsaw uses 16 amps at 120 volts then your wattage is Volts (120) x Amps (16) and that would be 1920 watts. So you will require a much larger inverter to run your chainsaw.
Can a laptop with a 65 watt power adapter be powered up with a 300 watt dc to ac inverter with 140 watt continuous operation with low voltage and overload protection?
Yes, theoretically you can power up a laptop with a 65 watt power adapter using a 300 watt DC to AC inverter, as the laptop will only draw the power it needs (65 watts). However, it's important to ensure that the inverter has low voltage and overload protection to prevent any damage to the laptop or the inverter itself during operation.
Will a 2000 watt inverter power a sump pump?
It depends on the power requirements of the sump pump. For a typical residential sump pump, a 2000 watt inverter should be enough. However, it's important to check the power consumption of your specific sump pump to ensure the inverter can handle it.
How many amps can a 1000watt inverter handle will it run a 10amp power saw?
A 1,000 watt inverter giving 110 volts is rated at 9 amps.
How many amps does a 5000-watt inverter draw from a 24 volt system?
A 5000-watt inverter on a 24 volt system draws approximately 208 amps (5000 watts / 24 volts = 208.33 amps). This calculation assumes 100% efficiency, so actual power draw may be slightly higher.
How many amps do you need in a relay for a 2000 watt RMS 4000 peak power inverter?
Amps x volts equals watts...200 amps at 12 volts would be 2400 watts...add a few more because. the inverter efficiency is not 100 percent...
How many 100 watt light bulbs can run with a 1500 watt power inverter?
we can use 12 no's
How much power does a DC to AC inverter use when not used?
One 150 watt inverter reports 0.2 Amps (=approx 2.4watts) Another inverter (180 watts?) reported 0.4 Amps If you find a fairly complete spec sheet, it may tell you the Amps or Watts that it uses under "No Load". I'm the originator of the question, and I discovered the "additional" specs.
How many amps does a 2500 watt inverter use?
If we assume that the inverter is used in your car on 12 Volts DC and you are creating 120 VAC; and the 2500 watts refers to the AC side of inverter then for a resistive load Amps = Watts / Volts = 2500/120.
How many watt DC to AC converter do you need to run a 6 amp power tool?
The formula for watts (or power) is Amps times voltage. Therefore with a 6 amp draw times 120 volts would be about 720 watts. A 1000 watt power inverter would do the job.
Can a 300 watt inverter run a 16 amp chainsaw?
One would assume the chainsaw requires 120 volts or more if you want to run it with an inverter. If your chainsaw uses 16 amps at 120 volts then your wattage is Volts (120) x Amps (16) and that would be 1920 watts. So you will require a much larger inverter to run your chainsaw.
How big of a power inverter will I need to power a 1000 watt car stereo amplifier amplifier draws roughly 100 amps of power?
You will need a battery charger capable of providing up to75 amps at 12 volts DC. This is called a converter, not an inverter. An inverter takes 12 v and transforms it usually to 120v AC or 220v Ac. Keep in mind that your 1000 watt amp will not draw 100 amps only briefly at times if at all unless you are at maximum volume. You probably could get by with a 50 amp charger and a big capacitor to supply the boost for a few seconds.
Can a 240 watt 2.0amp dc-ac power inverter power a compact fridge?
Answer If, when you state "...240 watt 2.0amp..." you are indicating that 2 amps, or 240 watts at 120 volts, then that inverter will power a device which does NOT draw more than that amount of current. Check the plate or label on the compact fridge you want to power, and find the maximum current draw. For appliances, it will usually be stated in amps, rather than watts. If that amount is equal to or less than the output of your inverter, then it should work. Also, pay attention to the maximum current used by the appliance, versus the continuous output figure for the inverter, NOT the peak momentary output.
Can a laptop with a 65 watt power adapter be powered up with a 300 watt dc to ac inverter with 140 watt continuous operation with low voltage and overload protection?
Yes, theoretically you can power up a laptop with a 65 watt power adapter using a 300 watt DC to AC inverter, as the laptop will only draw the power it needs (65 watts). However, it's important to ensure that the inverter has low voltage and overload protection to prevent any damage to the laptop or the inverter itself during operation.
How long will a 3000 watt inverter run on a 12 volt battery?
The runtime of a 3000-watt inverter on a 12-volt battery depends on the capacity of the battery, measured in amp-hours (Ah). To calculate, first convert watts to amps using the formula: Amps = Watts / Volts. For a 3000-watt inverter at 12 volts, it draws 250 amps. If you have a 100 Ah battery, for example, it would run for about 0.4 hours (24 minutes) under ideal conditions, not accounting for efficiency losses or the battery's discharge limits.
