The question is tehincally incorect.
Put some more information so people can understand what are you trying to ask.
A look up table, is what it say, a list of data that is used in programing of micro controllers, it is a table that the program use to look up data that it need to do the job, it is a list of data and each data item is associated with a index, in other words where in the table it is, look at the examples at this link. http://patenttrade.net/phpBB2/viewtopic.php?p=21#21
21
Hi As far as I have been able to figure out the 1600 puts out a whopping 21 amps, the 1700 puts out you ready for this? 20 amps. Not much anyway, so if you are looking to add a bunch of lighting like halogen rode lights better look for a higher out put stator and heavy duty regulator - rectifier, They are out there but nailing the seller down to actual output is hard. Hope this helps.
It Varies, Here in the Northeast, in NH it can be as low as $23 per hour to about $65 per hour if your self employed. If your working for a company or for your apprentiship you can expect as low as $8 per hour to $30 per hour. In NY A self-Employed person can make about $115 per hour - to as low as $7.85 a hour. If you work with a company or apprentiship you be making about $15 per hour or about $33 per hour
From the "Handbook of Electronic Tables and Formulas" for American Wire Gauge:For chassis wiring (in air, not in a bundle): AWG #29 or larger.For power transmission: AWG #21 or larger.
none you just need to be 20 or 21 years of age
21 standard sheets.
I need to this too
21 percent is 21% or 21/100.
How much 21 piece
32 sq. ft. in a sheet so 21 sheets more or less.
About 21 cubic feet
20' x 21' x 36" = 47 cubic yards, but 20' x 21' x 4" is only 15.67 cubic yards.
21 is $10.99 on YouTube.
About 21 ounces.
There is 32 sq ft in a 4 by 8 sheet of plywood. You would need at least 21 sheets to cover the roof.
21 centimeters is 8.27 inches.