It is resistive much load
Depends on the load it will carry which you failed to list.
Load Shedding is the action taken to reduce the load on something. It mainly refers to the electricity supply in order to avoid too much load on a generating plant.
Because by increasing the load resistance, the total circuit resistance is reduced. This means with less resistance, there is more current drawn from the source. Doubling the size of a load resistor increases the load current.
Yes, a #10 wire will carry 30 amps for 30 feet. If the load is rated as continuous then the wire will have to be derated to 80% capacity which will leave you with 24 workable amps. If the load demands currents higher that 24 amps then you will have to go to the next wire size up which is a #8 which is rated at 45 amps.
That depends on the mass density.
The Donkey can carry a load that is larger than a horse in comparison for size. So its from the idea that my horse can't carry that so its an "Ass load"
150lbs is a good average load
The Donkey can carry a load that is larger than a horse in comparison for size. So its from the idea that my horse can't carry that so its an "Ass load"
22 to 25 tons, typically.
It is a half ton pickup ,correct?
With a forklift, carry the load on the uphill side.
Carry on Carry the torch Carry the water Carry the load
A suspended load.
a dissolved load
The smaller the load a river has the more sediment it can carry is false. When the river has more energy, it is able to carry a larger load, therefore more sediment.
The smaller the load a river has the more sediment it can carry is false. When the river has more energy, it is able to carry a larger load, therefore more sediment.