0
What else can I help you with?
How do you calculate diameter of electrode for an electric arc furnace?
i don't know please give me the answer
Why eccentric bottom tapping is named eccentric in electric arc furnace?
off center
What is direct arc electric furnace?
An Electric Arc Furnace (EAF) is a furnace that heats charged material by means of an electric arc.Arc furnaces range in size from small units of approximately one ton capacity (used in foundries for producing cast ironproducts) up to about 400 ton units used for secondary steelmaking. Arc furnaces used in research laboratories and bydentists may have a capacity of only a few dozen grams. Industrial electric arc furnace temperatures can be up to 1,800 °C, (3272 °F) while laboratory units can exceed 3,000 °C. (5432 °F) Arc furnaces differ from induction furnaces in that the charge material is directly exposed to an electric arc, and the current in the furnace terminals passes through the charged material.
Why electric arc furnace shell to be grounded?
Which is the mínimum distance between the electrode an a grounding part.
How do you find out the correct phase sequence in an electric arc furnace to prevent the electrodes loosening?
To answer this question call a furnace person and ask him your question okay because nobody knows this. Stupid people! P.S. Why do you want to know this anyway?
What has the author D L Paulson written?
D. L. Paulson has written: 'Smelting cement copper in an electric-arc furnace' -- subject(s): Metallurgy, Copper, Flux (Metallurgy), Electric furnaces 'Production of blister copper by electric furnace smelting of dead-burned copper sulfide concentrates' -- subject(s): Metallurgy, Copper, Chalcopyrite
What is an EAF?
EAF stands for electric arc furnace.
What is EAF?
EAF stands for electric arc furnace.
How do you calculate arc length in electric arc furnace?
To calculate the arc length in an electric arc furnace, you can use the formula: ( L = \theta \times r ), where ( L ) is the arc length, ( \theta ) is the angle in radians, and ( r ) is the radius of the arc. First, determine the angle that the arc subtends at the center of the furnace, then measure the effective radius from the arc's origin to the point where the arc terminates. Multiply these values to find the arc length.
What is gantry mechanism in electric arc furnace?
A gantry mechanism in an electric arc furnace is a movable structure that supports and moves the electrode arms over the furnace. It is responsible for controlling the positioning of the electrodes during the melting process, allowing for precise control over the arc length and power input to the furnace. This mechanism enables efficient melting of metal scrap and ensures uniform heating of the materials in the furnace.
What makes spark at water panels in electric arc furnace?
Not appropriate earthing condition
How do you calculate diameter of electrode for an electric arc furnace?
i don't know please give me the answer
Why eccentric bottom tapping is named eccentric in electric arc furnace?
off center
What is direct arc electric furnace?
An Electric Arc Furnace (EAF) is a furnace that heats charged material by means of an electric arc.Arc furnaces range in size from small units of approximately one ton capacity (used in foundries for producing cast ironproducts) up to about 400 ton units used for secondary steelmaking. Arc furnaces used in research laboratories and bydentists may have a capacity of only a few dozen grams. Industrial electric arc furnace temperatures can be up to 1,800 °C, (3272 °F) while laboratory units can exceed 3,000 °C. (5432 °F) Arc furnaces differ from induction furnaces in that the charge material is directly exposed to an electric arc, and the current in the furnace terminals passes through the charged material.
Is there any copper inside an arc welder?
Like any mechanical tool, machine or similar engineering equipment, an arc welder will have lots of different materials inside it. An arc welder is an electrical machine and any electrical machine must have wiring inside it. Most electrical wiring will be made of Copper. So yes, there is likely to be some Copper inside an arc welder.
Why electric arc furnace shell to be grounded?
Which is the mínimum distance between the electrode an a grounding part.
Is the circle diagram possible for transformers?
Yes it is possible. They do it for Electric arc furnace. (one of the application I am aware of)
