12 Amperes is.
Removing any bulb breaks the continuity of a series circuit, stopping the flow of electrical current. Removing a bulb in a parallel circuit does not interrupt the current flow, so the remaining lights continue to conduct electrical current.
If a 9.0 volt battery is connected to a 4.0-ohm and 5.0-ohm resistor connected in series, the current in the circuit is 1.0 amperes. If a 9.0 volt battery is connected to a 4.0-ohm and 5.0-ohm resistor connected in parallel, the current in the circuit is 0.5 amperes.
If each battery is identical, yes.
A parallel circuit is a circuit where there is more than one path of which the flow of current can travel. It is also called a current divider as it divides the current since it splits the path.
To measure the current in the circuit an ammeter is used and it is connected in series
A parallel circuit is an electrical circuit that has more than one current branch.
Integrated Circuit or Monolithic Integrated Circuit or IC is an electronic circuit set on a plate. Its microscopic pathways carries electrical currents.
A circuit that has more than one path for the current to flow is a parallel circuit. The circuit must have two or more paths to be considered parallel. A circuit that has only one current path through multiple components is a series circuit.
parallel circuit
Fuse is a circuit element which disconnects the electrical current from the mains"supply" feeding the load when a condition of fault "short circuit " occurs. one behaviour of electric current that it flows undivided in circuit elements connected in series and is divided when flows in circuit elements connected in parallel. so in order to protect a circuit fuse MUST be connected in series to cut/disconnect the faulty current in a safe/short time. if u connect a fuse in parallel to a component then u will be shorting that component and the component will not function ;because the fuse is a thin wire with a negligible resistance and electrical current flows in the most easy "less resistive" component. besides a short circuit will happen immediatly because u connectthe supply to the neutral! hope that helps.
A series circuit is one in which the current must pass through all the electrical devices in the circuit in turn. A parallel circuit is one in which the current passes through each electrical device on the circuit following separate, independent path from all other devices on the circuit, one for each electrical device.
parallel
12 Amperes is.
Parallel Parallel
The difference between a series and parallel circuit is that a series circuit is connected in such a way that the same current intensity flows through the elements while a parallel circuit is connected in such a way that the same potential appears across their terminals.
A voltmeter is used to measure potential difference across two points in an electrical circuit . The voltmeter is connected in parallel across the circuit element (resistance ) so that its inclusion in the circuit has negligible effect on total resistance and current flowing in yhe circuit A voltmeter has high resistance,if connected in series it will increase of circuit and reduce the current in the circuit
Series circuit: elements are connected one after the other; the current (the electrons, or other charge carriers) has to pass through each of the elements in turn. Parallel circuit: elements are connected in such a way that part of the current will pass through one circuit element, part through the other.