Correct.
The current in a series circuit will be directly proportional to the voltage applied to the circuit, and inversely proportional to the resistance in it. Additionally, there will be one and only one path for that current, as it is a series circuit. All the current in the circuit will have to pass through each each element of the circuit. The current will all flow in one direction in a DC circuit; current is unidirectional. And will flow "back and forth" in an AC circuit, or will alternate directions, as one might expect.
Because the only opposition to current flow is the resistance of the circuit. This is because, at resonance, the vector sum of the inductive and capacitive reactances is zero.
Series, because everything in the circuit is in series.
In a series circuit, components (such as resistors, bulbs, or other devices) are connected end-to-end so that there is only one path for the current to flow. Because there is only one pathway for the current, the same current passes through each component in the circuit. This principle is derived from the conservation of electric charge. Since charge cannot accumulate or disappear in a closed circuit, the current that enters a component must be equal to the current that exits that component. In other words, the flow of current is continuous and consistent throughout the series circuit. Mathematically, this can be expressed as: I_total = I_1 = I_2 = I_3 = ... = I_n Where: I_total is the total current entering the series circuit. I_1, I_2, I_3, ..., I_n are the currents through each individual component in the circuit. It's important to note that while the current remains the same throughout a series circuit, the voltage (potential difference) across each component can vary depending on its resistance or impedance, according to Ohm's Law (V = I * R).
The primary difference between a series and a parallel circuit is how many pathways the current has to travel in. Let's look at both of them and see what's up. In a simple series circuit, there is only one path for current. The current must flow through every component in the circuit.
A series circuit has only one path for current flow.
No, that is a paralel circuit. a series circuit has two paths
In any series circuit, there is one and only one path for current flow. All the current flowing in the circuit will flow through all of the devices in that circuit. A break at any point in the circuit will cause current flow to cease. Lastly, it is current that is the same at any point in the circuit where we'd care to measure it.
Parallel means 2 straight lines and series circuit means a circuit with only one pathway for current flow
The current in a series circuit will be directly proportional to the voltage applied to the circuit, and inversely proportional to the resistance in it. Additionally, there will be one and only one path for that current, as it is a series circuit. All the current in the circuit will have to pass through each each element of the circuit. The current will all flow in one direction in a DC circuit; current is unidirectional. And will flow "back and forth" in an AC circuit, or will alternate directions, as one might expect.
A series circuit is where there is only one path for the current. As a result, and as a direct consequence of Kirchoff's current law, the current at every point in a series circuit is the same.
A series circuit is a circuit that only has one path for current to flow on, a parallel circuit is a circuit that has multiple paths for current to flow on. Parallel circuits are mostly used, especially in your house/home. The reason of that is because, if a device in a series circuit electrically malfuctions or goes down, it will stop the current flow, thus ending and cuting the whole rest of the circuit. In a Parallel circuit, if a device electrically goes down, current will still be able to flow through the other circuit branches, and the rest of the circuit, thus keeping electricity flowing.
Because there is only a single path in series circuit and many paths in parallel circuit.
Because the only opposition to current flow is the resistance of the circuit. This is because, at resonance, the vector sum of the inductive and capacitive reactances is zero.
A circuit in which electricity only flows in one path is called a series circuit.
A circuit that has more than one path for the current to flow is a parallel circuit. The circuit must have two or more paths to be considered parallel. A circuit that has only one current path through multiple components is a series circuit.
Answer: it will burn out **Explain:**The same current flows through each part of a series circuit. If the circuit is broken at any point there won't be any current that will flow. In this case, if one of the bulbs blew out, the other bulb would not be able to light up because the flow of electric current would have been interrupted. #Carryonlearning