0
If the switch is ALL you replaced, and if you hooked everything up EXACTLY like it was before, then it SHOULD work. Therefore, I suspect you got something wrong. How many screws are there for wire connections on the new switch? On the old switch? A single pole switch will have only 3 connection screws (counting the ground connection), while a 3-way switch will have 4 connection screws. (Also, a single-pole switch will have labels for "On" and "Off", while a 3-way switch will not have these labels.) Did you replace one or more of the three outlets? Did you wire the new outlets EXACTLY like the old ones were wired? Dig the old outlets out of your trash can and look closely at them. There should be a little metal tab connecting the two screw plates on each side of the outlet. Has this tab been broken off on either side of the old outlets? Is there a red wire anywhere in this circuit, and if so, how is it connected at the switch and at the outlets? Did you put any other devices on this circuit? If so, how are they connected? Something is not exactly the same as it was before. And I can't help you until you tell me what that is.
What else can I help you with?
What dominant color appears for an incandescent bulb?
The answer is a blue-green colour.
What is the function of diode 1418?
This appears to be a Motorola diode, and a data sheet is available from that company.
Why it is called as delay circuit?
because it delays the input signal by some time interval before it appears on the output.
Is there anywhere in Edinburgh, Scotland, I can buy brushless motors?
It appears that Claremont Electric Motors and AD Auto Electrics are two places that would either carry brushless motors or at least provide you with information on where you can buy brushless motors.
How much power in one farad?
Theæ definition of farad is as follows; SI unit of capacitance, formally defined to be the capacitance of a capacitor between the plates of whichæthere appears a potential difference of one volt when it is charged by a quantity of electricity equal to one coulomb.
How many times is the word standard mentioned in the Bible?
In the King James version the word - standard - appears 19 times the word - standards - appears 3 times
What is the meaning of laterally inverted?
Laterally inverted refers to an image or object that appears reversed from left to right when compared to the original or standard orientation. This type of inversion is commonly seen in mirrors or reflective surfaces.
What is the standard height of a refridgerator?
It appears to be around 65 inches.
What does 5.8 look like in standard form?
Exactly as it appears in the question.
If a newly created chart appears to have the data on the vertical and horizonal axes switched what charting feature can fix this mix-up?
Switch Row/Column.
What is Terminal rhymes?
Standard rhyme scheme, when the rhyme appears at the end of the line.
Who owns the copyright to the original score for the Film Hugo?
It appears to be held by Paramount.
What does the period number on periodic table mean?
The group number is an identifier used to describe the column of the standard Periodic Table in which the element appears.
Is the word Christ in the original text of A Christmas Carol?
No, it only appears as part of Christmas.
Does grissom appear in csi Miami?
No, he appears in the original CSI, which is based in Las Vegas.
What does the image look like in a flat mirror?
The image in a flat mirror appears laterally inverted, meaning left and right are switched, but the size and shape of the object are maintained.
Does the mirror image is back to front?
A mirror image appears reversed horizontally, meaning left and right are switched, but not back to front. For example, text in a mirror will be backwards.
