0
No see the following
ENCLOSURES
Enclosed circuit breakers shall have NEMA 1 general purpose ratings unless otherwise noted. Provide enclosures suitable for locations as indicated on the drawings and as described below.
1. NEMA 1 surface or flush-mounted general purpose enclosures primarily intended for indoor use.
2. NEMA 12 dust-tight enclosures intended for indoor use primarily to provide protection against circulating dust, falling dirt and dripping non-corrosive liquids.
3. NEMA 3R rain tight enclosures intended for outdoor use primarily to provide protection against rain, sleet and damage from external ice formation.
4. NEMA 4 watertight stainless steel intended for indoor or outdoor use primarily to provide protection against windblown dust and rain, splashing rain, hose-directed water and damage from external ice formation.
5. NEMA 7, Class I, Group D hazardous location cast aluminum intended for indoor use in locations classified as Class I, Group D as defined in the National Electrical Code.
6. NEMA 9, Class II, Groups E, F, G hazardous location cast aluminum intended for indoor use in locations classified as Class II, Groups E, F and G as defined in the National Electrical Code.
What else can I help you with?
Full form of dpc in building?
Damp Proof Course is one meaning.
How do you repair a laptop after spilling nail polish remover on it?
You could try using nail polish remover, and if it doesn't work try a damp cloth not to damp and rub it gently on the area.
What causes electricity pylons to hum?
induced currents,usually caused by damp weather wet etc
What outlets is generally used in damp locations?
In damp locations, such as bathrooms and outdoor areas, GFCI (Ground Fault Circuit Interrupter) outlets are generally used. These outlets provide protection by shutting off power when a ground fault is detected, reducing the risk of electric shock. Additionally, they are designed to withstand moisture and are typically installed in accordance with local electrical codes to ensure safety.
What type of armour cable to you need to run underground to your garage?
Armoured cable is not rated for underground installations. You have to use a cable with a designation for direct burial or wet and damp locations.
Is a Nema disconnect approved for damp location use?
No.
Is a nema 1 disconnect approved for damp location use?
No, a NEMA 1 disconnect is not approved for damp location use. NEMA 1 enclosures are intended for indoor use to provide basic protection against dust, light, and indirect contact with water. For damp locations, a NEMA 3R or higher rated enclosure is recommended to protect against moisture and water ingress.
What specifically makes a light fixture damp conditions approved in comparing fixtures that look like they could be for either indoor or outdoor the only difference is damp approved sticker?
You will usually find gaskets in fixtures for use in damp locations to keep out the moisture. A fixture could look the same, but could be sealed differently.
What is the location of fiddler crabs?
They live in the ocean or wet spots (Damp).
What are the Causes of damp proofing?
A builder may recommend damp proofing for certain parts of construction. This maybe do to the room of the house or the homes location in a highly humid area.
Is it harmful to health to use latex paint on kitchen sink?
No, but the damp location would soon ruin it anyway.
What is a vapor tight incandesent recessed light fixture?
A vapor-tight incandescent recessed light fixture is a sealed lighting fixture that prevents moisture, dust, and other particles from entering the fixture, making it suitable for use in damp or wet locations. It is designed to protect the light source and electrical components from potential damage caused by environmental factors.
Where is the best location to place a plant seed?
In soil which is moderately damp, and has good sunlight. But that also depends on what kind of plant the seed comes from.
How do you spell damp?
damp .
What does DEJ on blueprints mean?
DEJ likely stands for "Damp-Proof Course Elevation Joint." It is a mark used in construction blueprints to indicate the specific location where a damp-proof course and elevation joint is to be installed to prevent moisture penetration in a building.
How do you use damp in a sentence for a first grader?
I had a damp cloth. The weather was rather damp today.
Do you need a damp and dark place to grow mold?
it just has to be damp
