-- potential difference
-- electromotive force
Two names for practically the same condition. Peak inverse is name whereby the maximum voltage can be sustained. Breakdown is actually the point where a reverse voltage is reached and reverse breakdown has occurred
in generator the flux will determines the voltage. the flux will improve by auto voltage controller or any other equipment.
voltage is inversly proportional to speed speed and current are directly proportional to each other but voltage and current are directly proportional to each other..
Power is the product of voltage and current -in other words, mutliply the two together.
It isn't. It's the other way around. The line voltage is 1.732 times the phase voltage. The figure results when you vectorially add the relevant phase voltages.
Electrical conductors
The mean load voltage, in other words the average voltage, is zero in an ac system.
Depends on what the pore does. If they are channels - they are called Channels. Voltage gated / ligand activated channels. If they are to communicate with neighbouring cells - they are called gap junctions.
Two names for practically the same condition. Peak inverse is name whereby the maximum voltage can be sustained. Breakdown is actually the point where a reverse voltage is reached and reverse breakdown has occurred
The phase voltage is usually constant and determined by the supply voltage.
What other names does jibreel have
in generator the flux will determines the voltage. the flux will improve by auto voltage controller or any other equipment.
The breakdown voltage of an insulator is the minimum voltage that makes it partially conductive electrically. On the other hand, the breakdown voltage in a diode refers to the minimum reverse voltage to cause it to conduct in reverse.
If a short occurs in a resistor in series with other resistors, the voltage drops across the other resistors will increase. If a short occurs in a resistor in parallel with other resistors, the voltage drops across the other resistors will decrease, to zero.
The whole idea of synchronization is that you DON'T change the voltage (or frequency) from the other generators.
Need to know voltage and type of plug to answer this question.
if you are traveling out of the country a voltage converter is a neccessity. Because a lot of other countries use electricity on a different voltage.