bulb , bulb holder , wires and bataries are main compoments of a circuir
resistors, variable potentiometers
the circuit which contain passive components such as (capacitor,inductor,resistance) and may also contain Active components like transistorsif there is a transistor in the circuitit is ANALOG circuit if it is used in the active modeit is DIGITAL circuit if it is used in the saturation and cutoff mode
Inductors
because it is situated on the silicon board with resistors ,transistors and wires.These three things organize electrical circuit.Integrated = mixed or combined (same usage as "integrated school" in civil rights).Circuit = electronic circuit.Integrated Circuit = combination of a variety of components into one inseparable circuit.There are 2 types of integrated circuits:Hybrid integrated circuit = ceramic printed circuit board with ultra-miniaturized components soldered to the padsMonolithic integrated circuit = one piece (i.e., single stone) circuit made of silicon (or other semiconductor crystal) with all the different types of components part of that crystal (and layers of metal plated on it to connect components)
You need at least two components in your circuit before you can tell whether it's a series circuit or a parallel one.
The main circuit board into which components are attached to in a computer is known as the motherboard or main board. This is what will hold all the essential parts in a computer.
That would be the mother board.
MAIN COMPONENTS (HOUSE HOLD CIRCUIT)1. METER2. MAIN SWITCH3. PANEL BOARD4. SOCKETS5. LOADS~> C.A.P.T.A.I.N D.A.R.NA ! xD
Motherboard is the main board i.e. the housing of Multiple Circuits & Components.
write 3 components of an electronic circuit
write 3 components of an electronic circuit
Control board
It is called the motherboard.
motherboard is a main circuit board of computer and it includes ram,rom, pcl slots and usp ports and etc
In a series circuit, the potential voltage across the circuit components adds up to the total voltage of the circuit.
The 4 main components of a circuit are: (1) Switch - turns electric current on and off, closes and opens a circuit. (2) Load - resists the flow of current and converts electrical energy into another form of energy (ex. light bulb) (3) Wires - thin strips of insulated copper conducts the electric current, allowing it to pass through like a pathway, makes up the circuit. (4) Source - gives the circuit the required electrical energy A resistor can also be included as one of the components
Three main components that are needed to build a circuit will be a power source. This supplies the circuit with a voltage to operate. A load to make the current flow through the circuit, and conductors to join these two devices together to carry the current.