the flow in the semiconducoter is because of flow of elecrons and holes.because electrons and holes are diffused into each other in the forword baised
I think its related to junction of two dissimilar semiconductor (or semiconductor and metal) and not only a semiconductor. well when two opposite nature semiconductor (hetero or homo) are joined to form a junctions they allow the flow of current in one direction while blocks it in other direction. The applied bias V which will cause the current flow is called forward bias and the current flowing through the junction forward bias current.
A light-driven semiconductor device that prevents current flow in either direction until it receives a signal.
A p-n junction (or a metal-semiconductor junction) with rectifying behaviour is an electronic device which allows a one-way only current flow (between the two semiconductor regions, or between the metal and the semiconductor). An ohmic contact in a metal-semiconductor junction is realized by lowering the potential barrier (allowing electrons to easily migrate into the metal) and by increasing the doping levels in the semiconductor (more than 10^18 cm^-3): this way the potential barrier, that should stop electrons from migrating into the semiconductor, is confined in a very small region making it possible for electrons with low energy to pass through it (tunneling effect). This means that in a ohmic contact current can flow both ways; such a device apparently works like a resistor with a low resistance, hence the "ohmic contact" name.
Copper is a conductor but not a semiconductor.
SemiConductor = Kind-of-conducts.Really! By applying electricity to the conducting material (usually in a transistor or Integrated chip) the conduction rate of the material changes. This allows you to change the flow of electricity through the semiconductor by using a second smaller control voltage.This is the basis of most electrical components.Conductors(made out of materials that are not semi-conductors) fully allow electricity to flow through it.Insulators (Non-Conductors)completely block the flow of electricity.
Currents in a semiconductor are carried by the motion of electrons or of "holes", which are areas of localized electron deficiency.
Biasing means providing a voltage that overcomes or restricts the flow of carrier in semiconductor. No current will flow when any semiconductor is ubiased
A discrete semiconductor is an individual circuit that performs a single function affecting the flow of electrical current.
what is a semiconductor material? what are its main types, explain each type
Semiconductor companies design and manufacture primarily two types of products: integrated circuits (ICs) and discrete devices.
calculator
I think its related to junction of two dissimilar semiconductor (or semiconductor and metal) and not only a semiconductor. well when two opposite nature semiconductor (hetero or homo) are joined to form a junctions they allow the flow of current in one direction while blocks it in other direction. The applied bias V which will cause the current flow is called forward bias and the current flowing through the junction forward bias current.
Transistor Diode Resistor Capacitor
p-type semiconductor is obtained by carrying out a process of doping that is by adding a certain type of atoms to the semiconductor in order to increase the number of the free charge carriers.
A resistor or a semiconductor, depending on the design and function. Resistors inhibit current flow, while semiconductors control current flow (transistors are an example of semiconductor devices).
N- Type and P- Type :)
That is a DIODE, which can be of any of these types:P-N junction (shown above)point contactschottky barrier (i.e. metal-semiconductor junction)