answersLogoWhite

0

What else can I help you with?

Continue Learning about Electrical Engineering

What is symbol circuit?

A circuit symbol is a symbol that represents a component in a circuit. For example a light bulb is a circle with a cross in it.


What is the most important component of electric circuit and why?

That's a matter of opinion. Here's mine: The most important component of an electric circuit is the power supply. Because without it, no other component of the circuit does anything.


Should an ammeter always be connected in parallel with a component?

No, an ammeter should never be placed in parallel with a component - it should always be placed in series, so that the current through the component is measured.If you place an ammeter in parallel with a component, you create a short circuit around the component. Depending on the rest of the circuit, you could damage the circuit, damage the ammeter, create a fire, etc. You certainly will affect the current through the component, and that is not what you want to accomplish.


When you add a second battery to a series circuit what happens?

Adding a seound battery to a series circuit will increase the voltage, and require less current to keep the lights (if there are any on) as bright. Say you have a 6v battery, then you add another 6v battery. the voltage of the circuit would be 12v


What is the design procedure for clamping circuits?

Clamping circuits use diodes and capacitors. First, the first circuit must be set up, then a?æsine wave should be input into it. The input and output should be observed and adjusted as necessary; then, the process should be repeated for the other circuits.

Related Questions

Is a battery a resistor if not what is?

No, a battery is not a resistor. A battery provides electrical energy, while a resistor is a component that restricts the flow of current in a circuit.


What is indicated by reading of battery voltage on the side of component?

That a short to ground exists in the circuit.


Why are capacitors essential in clamping circuit?

Find it out yourslef


What blows ignition fuse?

A blowing fuse is an indication that there is a short circuit condition in that circuit. A short circuit condition is the result of a "hot" wire or component in a circuit coming into contact with another wire or component which is "grounded." Grounded means that a metallic component is somewhere connected to the ground post [terminal] on the battery.


What is indicated by reading of battery voltage on the ground side of component?

That a short to ground exists in the circuit.


Effect of shorting out the capacitor in a clamping circuit?

Any circuit using a capacitor will not work if the cap is short-circuited.


Which electrical component in a circuit provides energy to drive electric charges around a circuit?

Power source such as a battery if u pluged it in it will supply energy to drive electric charges around a circuit


What can be done to fix a pantech breakout when it wont charge or turn on?

It depends on what caused the device to not power on. The battery could be damaged. Replace the battery. The charging unit could be damaged. Replace the charging unit or find the damaged component and replace it. The charging connector could be damaged. Replace the circuit board or find the damaged component and replace it. The power button could be damaged. Replace the circuit board or find the damaged component and replace it. Something could have fried the circuit board. Replace the circuit board or find the damaged component and replace it.


Should you connect both ends of a battery in a circuit?

Yes, both ends of a battery should be connected in a circuit to create a continuous flow of electric current. When one end of the battery is connected to one terminal of a component and the other end to the other terminal, a closed circuit is formed, allowing electricity to flow and power the device.


In a parallel circuit does the battery run out very quickly?

No, it will run out just as much as if you put it in a series circuit. Parallel circuits involve the same voltage or amperage to go to each component.


What is the purpose of the battery in the circuit?

The purpose of the battery in a circuit is to wive energy to the circuit


Which component is likely to be damaged if hooked into a live circuit?

If a component is hooked into a live circuit, it is likely that the component itself will be damaged.