the magnitude is decided by the amount of flux, number of conductors, speed of the motor and the type of the winding used.
the polarity is decided by the direction of rotation of the motor and the direction of armature current flowing in the motor.
in any dc machine changing the polarity of the field will change its direction. here, in series motor, the field is in series with the armature, to which we feed the supply. hence, change the feeding polarity.
No, unless it is a three phase motor and you reverse only two of the phases.
Trick question: all motors do if you invert the polarity of input.CommentNot a trick question! In the case of d.c. motors, for example, you have to reverse the polarity to either the field or the armature -not to both. If you reverse it to both, it makes no difference to the direction of rotation! For a three-phase induction motor, you must interchange any two line conductors.
because we two different supply i.e a.c to the stator of synchronous motor and d.c to the rotor,hence we basically make opposite polarity by these two supplies.
I think by 'cross wiring' you mean reverse polarity. This means the hot wire is connected to the neutral screw and the neutral wire is connected to the hot screw. This shouldn't have any impact on an AC motor, since AC voltage already changes polarity 60 times per second.
When changing the auxilary face winding connection the current flow in the winding is changed so that the rotating emf direction is changed . Thats why the motor rotates in opposite direction.
Reversing polarity is not possible with an ac motor. Some do have wiring that will allow you to change rotation. The type and model of the motor can tell you if it is reversible.
If you are talking polarity. DC motors automotive application run poss to neg. But any dc motor can reverse by changing polarity.
yes sir
Reverse the polarity of armature windings of the motor.
Depends on which one. One determines amount of air that goes into motor, other determines amount of air that goes out of motor.....
in any dc machine changing the polarity of the field will change its direction. here, in series motor, the field is in series with the armature, to which we feed the supply. hence, change the feeding polarity.
The higher the frequency the higher the RPM the motor will turn
No, unless it is a three phase motor and you reverse only two of the phases.
A: A stepper motor does it not start and spins but rather move to the next position according to the polarity of the power applied
a general purpose D-C motor can be reversed by changing the polarity of either the armature or the field but not both
Is there a question here.